Used Forging Presses

3300 tons Press Forging Open Die Hydraulic Skoda CKV3300

• Manufacturer: Skoda
• Model: CKV3300

4-Column 3-Cylinder Push Down Open Die w/ 40-ton Zdas Rail Bound Manipulator 1) Built new in 1987, this press was fully rebuilt and modernized in 2006 Capacity : 3300 tons, Max. stroke : 1800 mm, Daylight : 3...

1000 tons Press Forging Hydraulic Muller ZE 1000-40.3.5

• Manufacturer: Muller
• Model: ZE 1000-4035

Hydraulic Double-Column Press Capacity : 1000 tons, Stroke : 1200 mm, Distance between columns : 4100 mm, Side window : 1300 mm, Daylight table - stroke up): 2.100 mm, Surface of table : 4000 x 2200 mm, Pr...

Friedrich Horn - Press for the production of refractory products - 1965 - Press

Press for the production of refractory products Press incl. hydraulic power unit, stone manipulator helm station and various accessories

TMP VORONEZ 400 ton

• Manufacturer: TMP VORONEZ

Ton: 400 | Table - x (mm): 1000 | Slide - stroke (mm): 250 | Number of strokes/minute: 25 | Frame (h/c): H FRAME | Inspection: 2005 | Conditions: WORKING | Activation system (eccentric/link motion/knucle joint/o...

630 tons Press Forging Hydraulic Ivo Lola Ribar HPD-2-630

• Manufacturer: Ivo Lola Ribar

Capacity : 630 tons, Ram stroke: 800 mm, Worktable: 1600 x 1250 mm, Maximum ram opening: 1300 mm, Minimum tool height: 500 mm, Maximum oil pressure: 260 bar, Ejector in lower table: 40 tons.

3500 tons Press Forging Hydraulic Presstec RPH-S 3500-1800/1500

• Manufacturer: Presstec

Ring blanking press Capacity : 3500 tons, Stroke : 1500 mm, Daylight: 2200 mm, Approach speed: 400mm/sec Return force : 270 tons, Daylight between the columns (left to right) :1800 mm, Daylight between the...

TMP VORONEZ 400 ton

• Manufacturer: TMP VORONEZ

Ton: 400 | Table - x (mm): 1000 | Slide - stroke (mm): 400 | Number of strokes/minute: 25 | Frame (h/c): H FRAME | Conditions: INSPECTION REQUIRED | Activation system (eccentric/link motion/knucle joint/oleodyna...

FORGING MACHINERY CHUN ZU CH-10LL operational

• Manufacturer: Chun Zu

CHUN ZU CH-10LL DOUBLE STROKE HEADERS Max cut-off diam.: 10 mm. Max cut-off length of shank: 193 mm. Max shank length of blank: 153 mm. Speed: 70 ppm Complete with lots of tooling

200 tons Press Forging Hydraulic Muller ZE160/200-10.1.7-U

• Manufacturer: Muller

Hydraulic Double-Column Press Capacity : 200 tons, Stroke : 600 mm, Distance between Columns : 1100 mm, Daylight Table - Ram (Stroke up) : 1100 mm, Surface of Table : 1000 x 1000 mm, Press Force of Die Cush...

1990 BARNAUL KB0034

• Manufacturer: BARNAUL

Ton: 250 | Table - x (mm): 800 | Slide - stroke (mm): 200 | Number of strokes/minute: 40 | Frame (h/c): H FRAME | Conditions: WORKING | Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly...

COLD FORMING MACHINE SASPI EF-00 1 DIE 2 BLOW

• Manufacturer: SASPI

COLD FORMING MACHINE SASPI mod. EF-00 1 DIE 2 PUNCHES With closed cut Good condition - Operational d. 5x30 350 ppm

COLD FORGING MACHINERY NATIONAL 61MS operational - Double-Stroke Headers

• Manufacturer: NATIONAL MACHINERY

COLD FORMIN MACHINE NATIONAL MACHINERY 61MS Operational - Fully Functional Double Stroke Header Year: 1986 Technical information: Number of dies: 1 Number of punches: 2 Pieces per minute: 400 Cutoff diame...

FORGING MACHINERY CARLO SALVI 873/SV - 1 DIE 2 BLOW

• Manufacturer: Carlo Salvi

CARLO SALVI 873/SV rebuilt as new Max wire diameter 9mm Max length under head 100mm Max cutoff length 125mm Pieces per minute 250