Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor
- Manufacturer: TheysohnTheysohn
54072001 Unused Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor. 44:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 55 Kw (73.75hp)1500 RPM-380volt/50cycle/3Ph Ex-pro...
Belvidere, IL- Trusted Seller
2003 WERNER & PFLEIDERER ZSK20
- Manufacturer: WP
- Model: ZSK20
Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extrude...
Hainesport, NJ - Trusted Seller
2008 COPERION ZSK-40-MEGA
- Manufacturer: Coperion Waeschle
Used 40mm Coperion Mega 40 co-rotating twin screw extruder. New 2008. No barrels or screws included. Driven by 200 hp AC motor, 1790 rpm, with Powerflight VFD controller. Has 1.155 gear ratio supplying 1200 rpm s...
Hainesport, NJ - Trusted Seller
2014 STEER OMICRON 12P
- Manufacturer: STEER
Used 12mm 45/1 L/D Steer Engineering co-rotating twin screw extruder with chrome plated steel screws and barrel. Model Omicron 12P, serial #EA00427, new 2014. Driven by a 2 HP, 480 volt/3/60 motor. Includes contr...
Hainesport, NJ 
PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (
54129001 Used PET Sheet Extrusion Line Capable up to 48" Wide, currently has 32"W Allied Flex-Lip Extrusion Die. 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 l...
Belvidere, IL- Trusted Seller
BATTENFELD CINCINNATI CM55
- Manufacturer: Battenfeld-Cincinnati
Used Battenfeld-Cincinnati model CM55 counter rotating approximately 55mm diameter twin screw extruder. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with 0.20...
Hainesport, NJ - Trusted Seller
Cincinnati CMT80L-APC
- Manufacturer: Cincinnati
- Model: CMT
Used Cincinnati model CMT80L-APC conical counter rotating twin screw plastic extruder. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adaptor plate that reduces the barrel exit down...
Hainesport, NJ - Trusted Seller
Gloucester 4.5"
- Manufacturer: Gloucester
Used 4.5" Gloucester hydraulic screen changer with strand die and hydraulic pumping system. Strand die has thirteen (13) 1/8" diameter holes.
Hainesport, NJ - Trusted Seller
Hainesport, NJ - Trusted Seller
Hainesport, NJ - Trusted Seller
Hainesport, NJ - Trusted Seller
DAVIS STANDARD 2.5"
- Manufacturer: Davis-Standard
- Model: 25
Used 2.5" Davis Standard extrusion screw. Marking on the screw read XA241155JT, C32819, and SL3-1.
Hainesport, NJ - Trusted Seller
EXTRUSION STRAND DIE 190 Hole
- Manufacturer: EXTRUSION STRAND DIE
Used 190 hole Strand die currently mounted on 10" Beringer screen changer.
Hainesport, NJ - Trusted Seller
BERINGER 12"
- Manufacturer: BERINGER
Used 12" Beringer slide plate screen changer Model 1200. Includes 10 hp hydraulic power pack (missing the Hyd. pump) and screen changer support stand.
Hainesport, NJ - Trusted Seller
EXTRUSION STRAND DIE 12-HOLE
- Manufacturer: EXTRUSION STRAND DIE
Used 6.75" wide strand die with 12 holes. Die currently bolted to a square adapter plate which can easily be separated.
Hainesport, NJ
Tip: Enter manufacturer, model or keyword
