Used Extruders

THORESON MCCOSH TD2000

• Manufacturer: Thoreson McCosh

Used 6,000 lb. Thoreson McCosh Desiccant Dryer Model TD2000. Serial #201-703-05. 480 volt, AC input, 20 hp. Amps 236.0, kw 182.0. No hopper included.

UNA-DYN GS150

• Manufacturer: Una-Dyn

Used Una Dyn Piovan Desiccant Dryer. Model GS150, serial #237240-01-01-0903. Rated at 150 cfm. Includes approximately 800 LB., 30" diameter x 72" straight side x 19" cone bottom insulated hopper with top mounted ...

CO-EX BLOCK 6-Layer

• Manufacturer: CO-EX BLOCK

Used extrusion co-ex Block last used in a laboratory environment with approximately 1.25" diameter extruders and a 12" sheet die. Includes six (6) inserts of varying percentages. Five (5) are in a box and one (1)...

2000 CLOEREN 2.5", 3.5" and 5.25"

• Manufacturer: CLOEREN

Used Cloeren 3-layer co-ex block designed for asymmetric layer configurations (A/B/C at 12/64/24%). For 2.5", 3.5" and 5.25" extruders. Manufactured 2000 Never used. Feed block is a variable geometry vein type.

LEISTRITZ 30mm

• Manufacturer: Leistritz

Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...

4.5" Hydraulic Screen Changer With Pump

Used 4.5" Hydraulic Screen Changer hydraulic pump and stand. Missing breaker plates. Includes approx. 11" wide strand die without die plate. Last used on 4.5" Prodex extruder.

BERINGER 12"

• Manufacturer: BERINGER

Used 12" Beringer slide plate screen changer Model 1200. Mounted on stand for 42" centerline height. Includes an upstream adapter for a 160mm twin screw extruder, a 10 hp hydraulic power pack and screen changer s...

WERNER & PFLEIDERER ZSK20

• Manufacturer: WP
• Model: ZSK20

Used 40mm Werner & Pfleiderer co-rotating Twin Screw Extruder. Model ZSK40, serial #180399, new 1990. Has 46/1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/...

Motan 100

• Manufacturer: Motan

Used 300 lb. Motan model 100 desiccant dryer. No hopper included. Serial #9003860. 6 kW total heater load, 80-100 psi air, 2.3 HP. 240 volt AC input.

THORESON MCCOSH TD360

• Manufacturer: Thoreson McCosh

Used Thoreson McCosh Model TD360 desiccant dryer including approximately 1000 lb. hopper. Rated at approximately 360 lbs. per hour. Includes 10 hp 460 volt motor, Serial #971128.

THORESON MCCOSH TD-24

• Manufacturer: Thoreson McCosh

Used Thoreson McCosh Model TD-24 dehumidifying hopper dryer. Serial #206-152-10. Caster mounted dryer includes 50 lb. capacity insulated hopper mounted on stand. 24 CFM. 480 volt, 3 phase, 60 cycle operation at 9...

CONAIR 18010902

• Manufacturer: Conair

Used Conair hot air Dryer. Model 18010902, serial #137284. No hopper included.

JOHNSON

• Manufacturer: Johnson

Used Johnson roll pull roll stand Has (2) 54" x 8" diameter rubber covered rolls Rolls are driven by 10 hp DC motor Drive-All 4-speed gearbox Air actuated top pull roll

2002 LEISTRITZ ZSE 100

• Manufacturer: Leistritz

Used Leistritz 100mm 44/1 L/D Co-Rotating Twin Screw Extruder. Model ZSE100 GL/44D, serial #3092, new 2002. Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Ne...

2002 COPERION 2.3"

• Manufacturer: Coperion Waeschle

Used 58mm Coperion Co rotating Mega Compounder with 11 barrel sections (34/1 L/D) and side feeder, New 3/2002. Has electrically heated water cooled barrel. Direct connected to 500 hp DC motor with SCR controller....