Used Extruders

Werner & Pfleiderer ZSK58 F96 Extruder - IPP# 210304

• Manufacturer: WP

twin screw extruder Electric heated barrel with water cooled jacket 84” long (Consisting of 9 blocks each 9.45"), 2.2” diameter discharge Rated for 96 Kpm torque per shaft or 960Nm Outer screw diameter is 57.8 mm...

Carbon Steel Francis Shaw & Co. LTD. Extruder - IPP# 706873

• Manufacturer: Francis Shaw

1m long carbon steel Extruder electric heated barrel

Extruder 60 mm (2.4 in) Carbon Steel - IPP# 224195

• Manufacturer: Axon

Axon Polystyrene Single screw extruder system throughput of approximately 5 ton/hour screw driven by 30kw, 3/50/380/660 volt, system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry granu...

Carbon Steel Axon PXR-60D Extruder - IPP# 224192

• Manufacturer: Axon

Axon carbon steel Single screw extruder system, throughput of approximately 5 ton/hour, screw driven by 30kw, 3/50/380/660 volt, system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry gr...

JC Ford Mixer/Extruder

• Manufacturer: JC Ford

· 230 Volt – 15 Amps – 60 Cycle – 3 Phase

Extruder 38.1 mm (1.5 in) Aluminum - IPP# 78337

• Manufacturer: Sterling

Sterling Having 3-zone electrically heated water cooled non-vented Xaloy 306 lined barrel. Barrel water cooling system utilizes cast aluminum heaters in a closed loop system including reservoir pump and heat exch...

Extruder 20 mm (0.79 in) Carbon Steel - IPP# 703671

Bone Brothers lab size single screw extruder. Unit has (4) electrically heated zones. Unit is complete with 7" diameter x 5" high stainless steel feed hopper cooling bath and control panel.

Extruder 70 mm (2.8 in) Stainless Steel 316 - IPP# 705279

• Manufacturer: Weber and Seelander

Laboratory Simplex Production rate: 70 Kg/hour maximum (soap). Speed 4.3-25.8 rpm screws rotate in opposite directions, (side by side), double jacket for cooling. (1) electric heater. Extruder driven by 1.1 KW, 3...

Carbon Steel Axon PXR-60D Extruder - IPP# 224194

• Manufacturer: Axon

Axon carbon steel Single screw extruders system throughput of approximately 5 ton/hour screw driven by 30kw, 3/50/380/660 volt system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry gran...

Extruder 60 mm (2.4 in) Carbon Steel - IPP# 224193

• Manufacturer: Axon

Axon carbon steel Single screw extruders system throughput of approximately 5 ton/hour, screw driven by 30kw, 3/50/380/660 volt, system includes (1)15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry gra...

Bonnot Single Screw Extruder 2.5 diameter x 48 long jacketed Extrusion Machine (SKU: 1508AA)(1508AA)

• Manufacturer: Bonnot

*Handling times for freight shipments average 5 days, but may vary depending on size, weight, location, and current trucking conditions. This does not include shipping time.* Item Dimensions - L X W X H - 78X36X5...

Extruder 65 mm (2.6 in) Carbon Steel - IPP# 706693

• Manufacturer: APV

twin screw Ko-Kneader system, (1) Baker Perkins 800mm diameter chilled drum roll cooler, series 2000, serial #65712, drum with pre-breaker and Kibbler granulator, granulator driven by 10HP, 1500 rpm motor, pre-br...