- Trusted Seller
Sputtering target from PLANSEE - MO / ST-TUBE Ø161 / 125X3249 12188
- Manufacturer: PLANSEE
Sputtering target, tube, pipe -Tube Dimensions: Outer: Ø 152 mm Inner: Ø 125 mm Total length: 3249 mm -incl. transport box
Wiefelstede, Germany - Trusted Seller
2015 SENTECH SI 500 D (PE-CVD)
- Manufacturer: SENTECH
https://www.khs-semi.com/de/sentech-si-500-d-pe-cvd Features: - thin film deposition - encapsulation - coating - e.g. SiO 2 , SiN x , SiON x , a Si - up to 200 mm wafers - glovebox for high purity sample l...
Erfurt, Germany - Trusted Seller
Europlasma plasma - decoating system from solut As 200 DLC
- Manufacturer: solut
Plasma stripping system ab solut Type: AS 200 DLC Plasma stripping system Plasma stripping system ab solut Plasma system for DLC stripping Vacuum receiver 200 x 200 x 200 mm Microprocessor control for gas mixtur...
2007 Applied Materials P5000 17
- Manufacturer: Amat
- Model: P5000
P5000 17 Area: CVD | Equ. grp code: 83404 | Workcenter (equ. grp. name): A_CV_SNIT_P5000_RS_8 | Completeness fully/some parts missing/ many parts missing: Yes, fully complete | Vendor: AMAT | Tooltype: P5000 | Q...
Regensburg, Germany
2012 Applied Materials P5000 9
- Manufacturer: Amat
- Model: P5000
P5000 9 Area: CVD | Equ. grp code: 79404 | Workcenter (equ. grp. name): A_CV_SNIT_P5000_K_RS_GAN_6 | Completeness fully/some parts missing/ many parts missing: Yes, fully complete | Vendor: AMAT | Tooltype: P500...
Regensburg, Germany
2011 Applied Materials Endura
- Manufacturer: Amat
- Model: Endura
no Chuck, no PSUs, No Evs beside this complete Ce marked: YES
Regensburg, Germany
2009 Applied Materials Endura
- Manufacturer: Amat
- Model: Endura
no ESC, no PSUs, No Evs, no MFS´s, No whole lower assambly where the ESC is installed beside this complete
Regensburg, Germany
2006 AMAT AMAT EPI CENTURA
- Manufacturer: Amat
- Model: Centura
Software Ver: B6.50 CB1 Amps: 300A Vita Controller Flow Point Model: Nano Valve Gas Panel Type: Configurable Wafer Size: 200mm (with conversion kit 150mm is possible) M-Monitor: CRT 3 Chambers ATM EPI With digita...
Regensburg, Germany
2007 Applied Materials P5000 20
- Manufacturer: Amat
- Model: P5000
P5000 20 Area: DEP | Equ. grp code: 73401 | Workcenter (equ. grp. name): A_CV_SNIT_P5000_K_6 | Completeness fully/some parts missing/ many parts missing: Yes, fully complete | Vendor: AMAT | Tooltype: P5000 | Qt...
Regensburg, Germany
2023 AMAT EPI Centura ACP
- Manufacturer: Amat
- Model: Centura
Brand new and unused EPI Centura ACP 300 mm 4 Chambers; Chamber code RH3, Lamp type BNA8 R3Mainframe Configuration E4 Single, 4 Facet SC ENP BLK2, Loadport AMAT Standard 300mm, EPI Water Module LT Design. RP EPI...
Regensburg, Germany
1997 Applied Materials P5000 34
- Manufacturer: Amat
- Model: P5000
P5000 34 Toolcode sending site: P500034 | Ifx et id:: 255050 | Area: PET | Eqtoolcode sending sitep500034ifx et id:255050areapetequ. grp code78222workcenter (equ. grp. name)p_an_pol_p5000_k_6completeness fully...
Regensburg, Germany
2007 Applied Materials P5000 21
- Manufacturer: Amat
- Model: P5000
P5000 21 Area: DEP | Equ. grp code: 79402 | Workcenter (equ. grp. name): A_CV_SNIT_P5000_K_RS_6 | Completeness fully/some parts missing/ many parts missing: Yes, fully complete | Vendor: AMAT | Tooltype: P5000 |...
Regensburg, GermanyUlvac
- Manufacturer: Ulvac
CME-200E/400 is the most suitable model in the PE-CVD series production system for deposition of Si films with application as Insulator or barrier layers. High-density plasma process with high-frequency (27.12 MH...
Munich, Germany
Tip: Enter manufacturer, model or keyword
