Used Cranes in Germany

GKS crane spreader beam

Crane spreader beam, load spreader beam, spreader beam GKS safety technology with bracket suspension Pin diameter: Ø 195 mm, length: 260 mm (suspension) 4 side load hooks with safety latch: Ø 190 mm, cross-sectio...

Crane attachment 40

• Manufacturer: Doka

Product Feature Value Shipping Weight: 1.80 kg Item Weight: 1.80 kg

Functional test crane yoke

• Manufacturer: Noe

Han: 999680

2013 Demag Cranes & Components GmbH ADE40TD

• Manufacturer: Demag

Demag Cranes flat gear motor Machine designation: Parallel shaft gear motor | Type: D1.0-51-1-231 | Serial no.: 50329544 | Call.: 531071-16020084 | Anr.: 531071-16020084

2013 Demag Cranes ADE40 TD

• Manufacturer: Demag

Details upon request Njjgx Machine designation: Parallel shaft gear motor

2011 Liebherr 81K

• Manufacturer: Liebherr
• Model: 81 K
• Capacity: 1,350 kilogram
• Maximum lift height: 40.4 meter

Work number: 50291 | Max. hook height: 26 m | Discharge: 45 m | Turning radius: 2.75 m

2017 Liebherr 34 K

• Manufacturer: Liebherr
• Model: 34 K
• Capacity: 4,000 kilogram
• Maximum lift height: 26 meter

Work number: 22059 | Max. hook height: 26 m | Load capacity: 4000 kg | Discharge: 33 m | Load capacity at max. discharge: 1000 kg | Turning radius: 2.5 m

P& H 855 B-LC

• Manufacturer: P & H

boom base, angle/tube type, section 1130 x 1010 mm, angles 90 x 90 mm, with bolts (24 pcs/joint), without shaft very good

MENCK M 90

• Manufacturer: MENCK

boom base without fairlead, mounting hole separation 870 x 650 mm, base 1340 mm wide, angles 75 x 75 mm

DEMAG B 410 LC

• Manufacturer: Demag

boom extension, tube/tube type, bolted, without neck ropes and bolts diagonal struts slightly deformed

DEMAG B 410 LC

• Manufacturer: Demag

boom point, double sheave, tube/tube type, bolted, with neck ropes, without shaft 2 puleys bad condition

2013 Liebherr 81K

• Manufacturer: Liebherr
• Model: 81 K
• Capacity: 1,350 kilogram
• Maximum lift height: 40.4 meter

Work number: 51319 | Max. hook height: 26 m | Discharge: 45 m | Turning radius: 2.75 m

P & H 855 B-LC

• Manufacturer: P & H

boom extension reinforced, angle/tube type, mounting hole separation 1155 x 745 mm, angles 90 x 90 mm, with 4 bolts not used

MENCK M 90

• Manufacturer: MENCK

boom base with 1 pc. fairlead, without shaft, mounting hole separation 870 x 650 mm, angles 75 x 75 mm, section 735 x 955 mm 2 diagonal struts slightly deformed