Used Bottling, Filling & Packaging in Germany

Filling line disposable bottles

• Manufacturer: Leibinger GmbH

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is appl...

2013 Vipoll Visipraktik VKR-ES-DN 12/3K

• Manufacturer: Vipoll

Overview This isobarometric filler was built in 2013 by the Slovenian manufacturer VIPOLL. This filler is available because it has been replaced by a larger machine. It has only a few operating hours and can be v...

2019 Terry GX 2-2, GGZ300-6S

• Manufacturer: Terry

Overview This filler and capper for products such as hand sanitizers, liquids, lotions and creams was built in 2019 by the Chinese manufacturer Terry. The machine is in its original, unused condition and is still...

1999 Krones Sensometic VP-I-PET 144-126

• Manufacturer: Krones

Overview This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is im...

2014 Kohem (now Cimec) RIS 8/1 - DPS

• Manufacturer: Kohem (now Cimec)

Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl ...

1966 H & K VVF 14/3

• Manufacturer: H & K

Overview This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments....

2003 Steelhead EUROPA 2 Wide

• Manufacturer: Steelhead

Overview This 5 Gallon Water Bottling filler was built in 2003 with proven technology by American manufacturer Steelhead. The machine is already dismantled, in storage and can be viewed in person. Techn. Details

1986 Krones Mecafill VK2V K126-308

• Manufacturer: Krones

Overview This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown...

2016 RL RIZZOLIO 4-4-1SAV4-RLV4 iAo RLC1

• Manufacturer: RL RIZZOLIO

Overview This isobaric triblock bottling machine was manufactured in 2016 by the Italian company Rizzolio. It is designed for the bottling of carbonated beverages and combines rinsing, filling, and capping in one...

2020 Wild Goose Meheen M6

• Manufacturer: Wild Goose

Overview The Meheen M6 isobarometric filler from the American manufacturer Wild Goose was built in 2020. The machine was used very little. Technical Details

2001 PROCOMAC / PE / ZECCHETTI/BARDI/ACMI/ROBOPAC

• Manufacturer: ACMI

Overview This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, an...

ASIMA mill BAUERMEISTER - type UTSA-02

• Manufacturer: Bauermeister

2018 Sema Maschinenbau Setzpackanlage

• Manufacturer: Sema Maschinenbau

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company...

2003 SIDEL Sidel, Krones, SIG Simonazzi

• Manufacturer: Sidel

Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handl...

2002 Hamba BK 8008 P

• Manufacturer: Hamba

Overview The filling line for cups was built by SIG HAMBA in 2002, is still in operation until the end of 2024, and can be inspected at any time. Technical data Cup formats: Max. Height 140 mm Filling ranges: Fil...