Used Agitators, Blenders, Mixers in Germany

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

remarks: Tank blasted and primed on the outside; Manhole diameter approx. 510 mm; 5 round connections in the lower bottom; 1 strong dent in the insulation jacket; former connections in the upper bottom cut off (s...

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

max. allowable working temperature: 120 °C remarks: Manhole diameter approx. 510 mm; 4 round openings and 1 further small opening in the lower bottom; the seam of the insulation jacket was slightly loose in one p...

1080 liter stainless steel 316 agitator tank with beam agitator

• Manufacturer: Diessel

max. allowable working temperature: 100 °C remarks: Cone height approx. 520 mm; spout with flange-mounted reduction fitting (reduced to 25 mm; end piece probably made of brass)

17620 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: AURICH Edelstahl GmbH

max. allowable working temperature: 95 °C remarks: Manhole diameter approx. 510 mm; height-adjustable screws of the feet are no longer present; 1 small pressure point in the insulation jacket

10000 liter horizontal agitator tank; Aisi304 with propeller agitator

Volume: 10.000 liter | Stand type: legs | Quantity legs: 4 Piece | Insulation: available | Insulating jacket: hermetically welded | Diameter inside: 2.000 mm | Diameter outside: 2.100 mm | Cylindrical length: 32...

300 liter agitator tank with cross blade agitator; Aisi 304

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

160 Liter isolated agitator tank with propeller agitator, Aisi 304

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

1700 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Connections to the heating coils around the cylinder and the lower bottom were partially welded shut by the previous operator; we suspect that the heating coils are no longer functional

THOUET agitator tank - type RW-3000, with a capacity of approx. 3,000 kg.

• Manufacturer: Thouet

The tank is double-walled for heating in mild steel. The hot water is provided by the installed screw-in heaters. Useful capacity: approx. 3,000 kg

THOUET agitator tank - type RW-3000, with a capacity of approx. 3,000 kg.

• Manufacturer: Thouet

The tank is double-walled for heating in mild steel. The hot water is provided by the installed screw-in heaters. Useful capacity: approx. 3,000 kg

5000 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Diessel

Temperature control cylinder (dj): half-coil temperature control bottom (dj): thermoplate notice: bump at the insulation jacket, scratches inside, Functionality of the double jacket not checked remarks: Sheet met...

2700 liter stainless steel 304 agitator tank with blades agitator

Volume: 2.700 liter | Lower bottom: flat bottom with slope | Upper bottom: open with loose cover | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 1.340 mm | Cylindrical height: 1.950 mm | Total hei...

5000 liter heat-/coolable agitator tank, Aisi 316 with 2 agitators

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil remarks: Heating coil outside around the lower cylinder area; 3 of the feet are equipped with load cells (no guarante...

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank