Used Agitators, Blenders, Mixers in Bremen, Germany

500 liter pharmacy agitator tank, Aisi 316 with blades agitator

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions) agitator features: Attention: Stirrer shaft (1.4301) and baffle (1.4541), Ais...

4500 liter coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket with trickle ring - only suitable for pressureless cooling; a rectangular sheet was cut out o...

15600 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Behälter KG Bremen

max. allowable working temperature: 80 °C max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): squared half-coil temperature control bottom (dj): thermoplate remarks: Manhole diame...

12000 liter insulated agitator tank, Aisi 304 with 2 propeller agitators

• Manufacturer: Waldner

remarks: 1 partition (with openings) in the middle of the tank divides the cylinder length of 5000 mm into 2 x 2,500 mm; lower area in the inner tank straight instead of round due to the design; both tank chamber...

900 liter heat-/coolable agitator tank, Aisi 304 with propeller agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket material temperatur control system: AISI 304 (V2A) 1.4301

6570 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Tuchenhagen

max. allowable working temperature: 95 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 95 °C Temperature control cylinder (dj): half-coil temperature control bottom (...

2000 liter agitator tank, Aisi 304 with lateral inclined blade agitator

remarks: Base plates of the feet made of Fe (1 base plate with hole; see photos) EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

180 Liter heat-/coolable agitator tank, Aisi 304 with propeller agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket material temperatur control system: AISI 304 (V2A) 1.4301

3533 liter heatable agitator tank, Aisi 304 with inclined blade agitator

max. allowable working temperature: 50 °C max. allowable working temperature (dj): 50 °C temperature control bottom (dj): double jacket remarks: Double jacket with electric plug-in heater: 9 kW (incomplete; funct...

2700 liter stainless steel 304 agitator tank with blades agitator

Volume: 2.700 liter | Lower bottom: flat bottom with slope | Upper bottom: open with loose cover | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 1.340 mm | Cylindrical height: 1.950 mm | Total hei...

5000 liter heat-/coolable agitator tank, Aisi 316 with 2 agitators

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil remarks: Heating coil outside around the lower cylinder area; 3 of the feet are equipped with load cells (no guarante...

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

14000 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm...