Used processing in Baden-Württemberg, Germany

2007 Frech DAK 580/62 Die Casting Cell

• Manufacturer: Frech

consisting of dosing furnace Westomat 65 S, 540 dm3, . 4568, Die casting machine Frech DAK 580-62, Spraying robot Fanuc m710ic, incl. robot control and touch panel, Parts removal robot Fanuc R2000ic, incl. robot ...

1999 OMS Die Casting Cell

consisting of melting furnace Striko West furnace W 65 SL, built in 1997, serial no.: 55288, die casting machine OMS, spraying robot Fanuc, incl. robot control, parts removal robot Kuka KR 15-2 built in 1999 incl...

2014 FRECH ZC200/250

• Manufacturer: Frech

Used machine furnace, Meltec type ZC 200/250, for use on Oskar Frech DAW 200 hot-chamber die-casting machines for processing zinc alloys. Melting capacity per hour: 250 kg/h, 36 kW power rating. Control cabinet w...

2001 FRECH M200/120

• Manufacturer: Frech

Used machine furnace, Meltec type M 200/120, for use on Oskar Frech hot-chamber die-casting machines with a 200-ton capacity for processing magnesium alloys. Melting capacity per hour: 120 kg/h, 54 kW power ratin...

2017 ROBAMAT 2212

• Manufacturer: ROBAMAT

Used heating and cooling unit from Robamat for use on die casting machines. This dual-circuit unit is designed for controlling the temperature of a die casting tool with water. The unit has been tested, serviced,...

1994 FRECH DAW 50

• Manufacturer: Frech

Used DAW 50 machine as a basis for a general overhaul without control cabinet, furnace, or furnace cabinet. A general overhaul can be carried out at the manufacturer's overhaul facility. The scope of this can be ...

2024 FRECH W80Zn-RC

• Manufacturer: Frech

Machine Equipment 1.0.2 Closing Part Cover on the Base Frame for Scale/Slide 1.1.0 Motorized Safety Door on the Left in the Pouring Direction 1.4.0 Machine Mountings 1.5.4 Machine Interior Lighting 1.11.0 Equipme...

1993 RAUCH MO 50 E

• Manufacturer: Rauch

Used Rauch furnace, type MO50E, including used cast iron pan, base, and control cabinet. Heating output 17.5 kW at 3 x 400 V 50 Hz Suitable for DAW 40 and DAW 50

1992 FRECH DAW 50

• Manufacturer: Frech

Used DAW 50 die-casting machine with SBC2 control for zinc alloys. Available from our used machine warehouse. The machine is equipped with a Rauch MO50E electric furnace and a used Oskar Frech 401 pneumatic spray...

2000 FRECH DAW 80S

• Manufacturer: Frech

Refurbished DAW 80 GO die-casting machine with DataLogic control for zinc alloys. Available upon request.

2024 FRECH W50Zn-RC

• Manufacturer: Frech

Machine Equipment 1.0.1 Closing Part Cover on the Base Frame 1.0.2 Closing Part Cover on the Base Frame for Scale/Slide 1.1.0 Motorized Safety Door on the Left in the Pouring Direction 1.4.0 Machine Mountings 1.5...

2024 FRECH W20Zn-RC

• Manufacturer: Frech

Machine Equipment 1.0.2 Closing part cover on the base frame for the scale/chute 1.1.0 Motorized safety door on the left in the pouring direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equi...

2000 FRECH ZC80/180

• Manufacturer: Frech

Used furnace cabinet for a Frech type DAW 80 die casting machine – suitable for a MELTEC type 80/180 multi-chamber furnace with individual controllers. Has been tested for functionality by the manufacturer.

1995 RAUCH MOS 50/80U

• Manufacturer: Rauch

Used Rauch furnace, type MOS50/80U, including used stainless steel crucible (third-party manufacturer) and substructure. No furnace control cabinet. Heating output 24 kW at 3 x 400 V 50 Hz Suitable for DAW 50 and...

2000 MELTEC ZC20/120

• Manufacturer: MELTEC

Used electric multi-chamber furnace, Meltec type ZC 20/120, including used stainless steel crucible, insulated crucible cover, base, and control cabinet. Heating output 21.5 kW Suitable for DAW 20 Cable set avail...