Used Processing in Indiana, USA

Carbon Steel Flat Ground Stock 2.00" x 30" x 36-1/4" 615Lbs

Mild steel. No grade stamp on this piece. " If this item ships as Flat Rate Freight please see details in Shipping tab

Mild Carbon Steel Flat Ground Stock 3-1/4" x 20-1/4" x 42-1/4" 790Lbs

Mild steel. No grade stamp on this piece. +/- .005") If this item ships as Flat Rate Freight please see details in Shipping tab

Vista Metals ATP-5 Machined 3/4" Cast Aluminum Tooling Plate 60"x120" Sheet

• Manufacturer: Vista Metals

Vista Metals ATP-5 Solid Aluminum Sheet. The top side is scratched up but the bottom has the majority of the cover still on. 3/4" thickness. 60-3/4" width x 120" length. If this item ships as Flat Rate Freight pl...

30"x 20° Butt Spur Galvanized Steel Skate Wheel Gravity Conveyor LH Diverter 10

New Surplus Conveyor Sections. Lot of 10 Sections. Galvanized Steel Frame and Steel Rollers. 30" Width x 86" Length. 1.9" Roller Dia. 1.5" Axle Centers. 90 Lbs Per Section. If this item ships as Flat Rate Freight...

Graphite Milling Block Bulk Chunks High Density Carbon 1250 Lbs.

Die Pressed Artificial Graphite Block with High Density High Purity Die Pressed Artificial Graphite Block This is a bulk listing of graphite blocks that were used as a cast mold. Various size pieces in the skid. ...

Sikorsky Main Rotor Spindle Assy For A Blackhawk Or Seahawk Helicopter

• Manufacturer: Sikorsky

Sikorsky Main Rotor Spindle Assy For A Blackhawk Or Seahawk Helicopter (Bearing Spare). PN 70102-08200-050 / S/N D324-57612. There is a small scratch on the finish on the up right side visible on one of the pictu...

Una-Dyn 400# Desiccant Dryer Plastic Hopper 400lbs Dual Wall Receiver Drying Bin

• Manufacturer: Una-Dyn

Used, in Good Working Condition. Removed From a Working Environment. This unit can hold 400 lbs. Receiver hopper has a 1-1/4" inlet. Hose has an air powered end to feed material in the hose. Unit has 2" inlet out...

Una-Dyn 400# Desiccant Dryer Plastic Hopper 400lbs Dual Wall Receiver Drying Bin

• Manufacturer: Una-Dyn

Used, in Good Working Condition. Removed From a Working Environment. This unit can hold 400 lbs. 30" diameter Receiver hopper has a 1-1/4" inlet. Hose has an air powered end to feed material in the hose. Unit has...

Foremost Machine Builders PEF-2 Screw Pellet Feeder W/ Gravity Feed Hopper Unit

• Manufacturer: Foremost Machine Builders

This unit has a Foremost Machine Builders PEF-2 Pellet Feeder with controller (controller works but is missing knob) Bottom hopper is 24" diameter and 29" tall Top stainless steel hopper is 16" diameter and 20" t...

Eurotherm MCD2-11021-120-0-00 MACO Compact Operator Station

• Manufacturer: Eurotherm

Used, in working condition. Removed from a working environment. Was pulled off of a working injection molding machine. Looks almost new. A little wear on the keys. If this item ships as Flat Rate Freight please ...

Sonitek SU-10LB Thermal Press Heat Staking Machine Set 6 Zone PLC Control 3Ph

• Manufacturer: Sonitek

Used, in Good Working Condition. Selling as a set. Right and left. We were not able to fully test. Heating units all heat up as they should. Has PLC temp controls and sensors. Not sure on the voltage. Original ta...

Sonitek TS500 Thermal Press Heat Staking Machine 3 Zone PLC Control 120V

• Manufacturer: Sonitek

Used, in Good Working Condition. We were not able to fully test. Heating units all heat up as they should. Has PLC controls and sensors. If this item ships as Flat Rate Freight please see details in Shipping tab

Una-Dyn Solid Cone Hopper, #150, Insulated, Stainless W/Autoload OS-10 Feeder

• Manufacturer: Una-Dyn

In good used condition G55000020 TSC-150,2.5", NO HTR, std lid 150 lb. Solid Cone Hopper Autoload OS-10 Feeder, Movacolor, Volumetric Feeder,110 volt (Feeder does not have a controller) Overall height is 86" Una-...

Una-Dyn Solid Cone Hopper, #150, Insulated, Stainless W/Autoload OS-10 Feeder

• Manufacturer: Una-Dyn

CLICK HERE FOR MANUFACTURER'S SPECS In good used condition G55000028 TSC-150,2.5", NO HTR, std lid 150 lb. Solid Cone Hopper Autoload OS-10 Feeder, Movacolor, Volumetric Feeder,110 volt Overall height is 86" Una-...

Una-Dyn TSC-100 Solid Cone Hopper, Insulated, Stainless W/Autoload OS-10 Feeder

• Manufacturer: Una-Dyn

CLICK HERE FOR MANUFACTURER'S SPECS In good used condition Una-Dyn TCS-100,2.5" NO HTR STD LID SPCL (100 LB. hopper) MO ; 8015687 Autoload OS-10 Feeder, Movacolor, Volumetric Feeder,110 volt Overall height is 87...