Used Foundry & Casting in Wallonia, Belgium

Moulding machine HEINRICH WAGNER HRP1.1

• Manufacturer: Heinrich Wagner

Outer dimensions: length: 850mm; width: 1300mm; height: 1950mm Moulding box min: lenght: 450mm; width: 350mm Moulding box max: length:1000mm; width: 600mm With control board and emergency stop

Thickness measurement with ultrasound KRAUTKRAMER BRANSON

• Manufacturer: Branson

Type DME DL Dimensions: 250 ×230×120mm | Plage de mesure: 0,5mm à 300mm

1999 Gazing unit LÜBER LW FDA 3250 32 kW

• Manufacturer: Lüber

32kW; 400V; 50Hz Dimensions: Lenght: ±1500mm; Width: ±900mm; Hight: ±1800mm The control for the gazing cycle is controled by the core shooter the unit is equiped by a smal amin vessel (±2l) with connection to a c...

Vibrating conveyor JML 10000mm ×2000mm

• Manufacturer: JML

Outer dimensions: length: 11000mm; width: 2300mm; height:1200mm Inner dimensions: length: 10000mm; width: 1900mm; height: 150 mm Driven by 1 motor (15KW) With eccentric axle, driven by 5 V-belts Without counter s...

Vibriting conveyor JML 1350mm×2000mm

• Manufacturer: JML

Weight: 32t (2 parts: 15t and 17t) Outer dimensions: Length: 14000mm; Width: 2950mm; Height:1750mm Inner dimensions: Length: 1350mm; Width: 2000mm; Height: 150 mm Driven by 1 motor (15KW) With eccentric axle, dri...

1981 Green sand mixer EIRICH DWV 29/6, 6000 l

• Manufacturer: Eirich

With hydraulic discharge flap With 2 whirlers (swirler), 160 kW each With 2 cup drive motor, 150 kW each

Bunker, ± 2 m³, with discharging conveyor

External dimensions: length 4400 mm, width 1650 mm, height 2050 mm Dimensions of belt: length center distance 3650 mm, width 600 mm Plastic lining inside the bunker Drive via V-belt to slip on gear box

2018 Pouring ladle ACETARC, with transport foot, ± 1600 kg

External dimensions: length 1600mm, width 1350mm, height 1700mm With useful lining With one long and one small spout With bold-on trunnions With transport foot for lift tracs With heat protection With type plate ...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE LB20

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

Turnover moulding machine KÜNKEL WAGNER, WPM 1

• Manufacturer: Künkel Wagner
• Model: WPM 1

Weight: 2600 kg | Dimensions: width 840mm, depth 2100mm, height 1740mm | Table: 700mm x 500mm | Maximum width (depth) of moulding boxes: 620mm | Pression: 5000 kg | Jolt capacity: 360 kg | Lowering stroke: 300mm

Crucible support scissors for crucible A300

Weight: 25 kg

1979 DISAMATIC 2013 MK5, cycle time 9s, with AMC

• Manufacturer: DISAMATIC

DISAMATIC 2013 MK 5 (upgraded from MK 3 to MK 5 in 2009) Control board SIEMENS S7 Touch Panel Conveyor belt under the machine (cellar) With AMC 18, hydraulic

1992 Amine Gas Washer BGT, 20 000 m³/h

With collection tray With exhaust With coarse separator, 2m x 2m x 1,6m