Used Grinding Machines in Gunma, Japan

H019298 Center hole grinding machine
- used
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
H015755 Center hole grinding machine Jones Shipman
- used
- Manufacturer: Jones & Shipman
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
2007 Koyo Machine MG32AIP
- used
- Manufacturer: Koyo
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
1989 Nikko Machine NFG-515A
- used
- Manufacturer: Nikko Machine
Permanent magnetic chuck size 250 x 130 with left/right and front/rear feed with up/down fast feed with front/rear digital scale with dust collector (dry type) If there is any discrepancy between the contents and...
Tatebayashi, Japan
2002 Toyoda Machine Works GL4A-50II
- used
- Manufacturer: Toyoda
GC32 Swing over table 320 Center-to-center 500 Spindle and center push taper MT4 Max. grinding wheel OD 455 x width 75 x ID 127mm Max.
Tatebayashi, Japan
1989 Nikko Machine NFG-515A
- used
- Manufacturer: Nikko Machine
Ei-magnet chuck size 250 x 125 with left/right and front/rear feeds, with top/bottom rapid feeds, with front/rear digital scale, with dust collector (dry type) If there is any discrepancy between the contents and...
Tatebayashi, Japan
2006 Nikko Machine NSG-64H
- used
- Manufacturer: Nikko Machine
Chuck size 600×400 Fully automatic, automatic infeed, with magnetic separator, with cutting tank, with dust collector ★Test cutting has been performed! (Photos are being posted.) In case of any discrepancy betwee...
Tatebayashi, Japan
1990 Nikko Machine NFG-515
- used
- Manufacturer: Nikko Machine
Chuck size 315 x 110 with 2-axis digital scale with up/down feed If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
2016 Scientific Instruments GIS-800LE
- used
- Manufacturer: Scientific Instruments
Spindle chuck Kitagawa/JN12T Max. machining diameter 200 Max. machining length 200 Center-to-center 1450 Swing 550 on table If there is any difference between the contents and the actual product, the actual produ...
Tatebayashi, Japan
1991 Amada Wasino GLS-135B
- used
- Manufacturer: Amada - Wasino
- Model: GLS-135B
If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
Sansei SS-5F
- used
- Manufacturer: Sansei
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
2002 Tsugami TVG 6
- used
- Manufacturer: Tsugami
- Model: TVG6
Max. machining height 60 Max. machining length 120 Grinding wheel dimensions: Outer 600 x inner 360 x width 120 x thickness 60 Machine weight 5.5t If there is any discrepancy between the contents and the actual p...
Tatebayashi, Japan
Star Micronics BG-1
- used
- Manufacturer: Star
- Model: BG-1
200V If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
2000 GPS-20 and 50, Shigiya Seiki Mfg.
- used
- Manufacturer: Seiki
FANUC POWER MATE Swing 200 on table, 500 between centers, max. machining diameter φ200, both centers, cutting tank ★Maintained (table top grinding, spindle rubbing, tailstock rubbing)
Tatebayashi, Japan
2002 WIDA PGX-2000SP
- used
- Manufacturer: WIDA
FANUC-20iF Table size 400 x 220 with C-axis indexing, with dust collector If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan