- Trusted Seller
Reduce Forging Roll Bliss
used
- Manufacturer: Bliss
Max Billet Dia. : 45-50 mm. Item condition: Good working condition | Capacity tons: 50
India - Trusted Seller
Reduce Forging Roll National 6
used
- Manufacturer: National
Max. stock diameter : 75 mm, Diameter of roll : 300 mm, Max. length of rolled section : 600 mm, Standard roll width : 254 mm, Air clutch : Yes, Air break : Yes, Controls : Yes, Motor : 25 HP.
India - Trusted Seller
Hammer Forging Belt Drop NSE
used
- Manufacturer: NSE, India
Capacity : 1 ton Item condition: Good condition | Capacity tons: 1
India - Trusted Seller
Hammer Forging Belt Drop NSE
used
- Manufacturer: NSE, India
Capacity : 0.75 ton, Item condition: Disassembled | Capacity tons: 0.75
India - Trusted Seller
Hammer Forging Belt Drop Massey
used
- Manufacturer: Massey
Capacity : 1 ton Item condition: Good condition | Capacity tons: 1
India - Trusted Seller
Hammer Forging Pneumatic Chambersburg
used
- Manufacturer: Chambersburg
Capacity : 1 ton (2000 pounds), Stroke : 1150 mm, Between guides : 475 mm, Ram (front to back) : 500 mm, Anvil cap (front to back) 650 mm, Inlet : 50 mm, Exhuast : 50 mm, Manuals are available.
India - Trusted Seller
Hammer Forging Pneumatic MPM1600B
used
- Manufacturer: Huta Zygmunt, Polish
Capacity : 0.75 tons. Energy of blow : 18.4 KJ, Weight of falling part (without die) : 690 kg, Max weight of upper die : 200 kg, Weight of anvil block without die holder : 12.5 tons, Weight of hammer with an...
India - Trusted Seller
Hammer Forging Pneumatic MPM500
used
- Manufacturer: Huta Zygmunt, Polish
Capacity : 0.5 ton, Blow energy : 1800 mkg, Stroke : 850 mm, Weight of falling parts : 590 kg, Number of strokes per minute : 120 1/min, Length of die seat in the tup : 360 mm, Length of die seat in the tup...
India - Trusted Seller
Hammer Forging Pneumatic MPM1000
used
- Manufacturer: Huta Zygmunt, Polish
Capacity : 1 ton, Percussive energy : 3600 mkg, Ram weight : 1250 kg, Mode of operation pneumatic, Table size (front to back) : 700 mm, Stroke : 800 mm, Strokes : 10 min, Working pressure : 5-7 atm, Max. ...
India - Trusted Seller
Hammer Forging Pneumatic 4KGL
used
- Manufacturer: Beche
Capacity : 4 tons, Ram thickness : 500 mm, height : 600 mm, Die Blockap : between pillar 700 mm, Input energy : 40kj, Ram dia : 480 mm, Air receiver tank : 14 feet x 5.5 feet, with all pipe line & other ac...
India - Trusted Seller
Hammer Forging Pneumatic Huta MPM1600B
used
- Manufacturer: Huta Zygmunt, Polish
Capacity : 0.75 tons. Energy of blow : 18.4 KJ, Weight of falling part (without die) : 690 kg, Max weight of upper die : 200 kg, Weight of anvil block without die holder : 12.5 tons, Weight of hammer with an...
India - Trusted Seller
4 tons Hammer Forging Hydraulic Lasco
used
- Manufacturer: Lasco
Capacity : 4 tons, Item condition: Good working condition | Capacity tons: 4
India - Trusted Seller
10 tons Hammer Forging Pneumatic Russian M2150
used
- Manufacturer: Russian
Capacity : 10 tons, Weight of the ram : 10 tons, Blow energy : 26000 Kgm, Speed : 30 stroke/minute, Stroke : 1400 mm, Distance between guides : 1000 mm, Ram surface : 1180 x 1180 mm, Surface die support : ...
India - Trusted Seller
10 tons Hammer Forging Pneumatic M2150
used
- Manufacturer: Russian
Capacity 10 tons, Weight of the ram : 10 tons, Blow energy : 26000 Kgm, Speed : 30 stroke/minute, Stroke : 1400 mm, Distance between guides : 1000 mm, Ram surface : 1180 x 1180 mm, Surface die support : 13...
India - Trusted Seller
3.15 tons Hammer Forging Pneumatic Russian M2145
used
- Manufacturer: Russian
Capacity : 3.15 ton, Nominal mass of drop parts : 3150 kg, Rated striking energy : 80 KJ, Max. no. of blows/min. : 56, Ram stroke : 1250 mm, Uprights distance : 710 mm, Ram dimensions : 750 mm, Die holder ...
India 
Šmeral Brno ULS 100 Forging
used
- Manufacturer: Šmeral Brno
- Model: ULS 100
Good condition Šmeral Brno ULS 100 Forgings manufactured in 2010. Located in United Kingdom and other countries. Click request price for more information.
United Kingdom
Tip: Enter manufacturer, model or keyword