Used Machine Tools

20" X 59" WALKER - HAGOU B.V. "46" ELECTRO-MAGNETIC CHUCK

• Manufacturer: Walker
• Model: 46

19 5" X 59" WALKER-HAGOU B.V. ELECTRO-MAGNETIC CHUCK SERIAL # EG2699 MODEL 46

AGR Bodine Custom Designed Assembly Machine

• Manufacturer: Bodine Electric

AGR Bodine Custom Designed Assembly Machine, S/N 976458 (New 1997), Electrical Push Button Controls and Test Station, Keyence 3-Axis Laser Marker System, Banner Electric Light Curtains (Location: Tallahassee, FL)...

1999 Woods 1130

• Manufacturer: Woods

3 point hitch, post hole digger, 12" bit and 6" bit

2000 PSI CHIPBLASTER "EV2000RI" HIGH PRESSURE HIGH VOLUME COOLANT SYSTEM

• Manufacturer: ChipBlaster

2000 PSI CHIPBLASTER "EV2000RI" HIGH-PRESURE HIGH-VOLUME COOLANT SYSTEM - 13 GPM - 50 gallon capacity - 10 HP 2000 PSI CHIPBLASTER HI-PRESSURE COOLANT SYSTEM Serial No 1810, Model EV2000RI EQUIPPED WITH: Inlet, O...

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26785 ALSO.

58" X 26" ALPHA-MAGNETS “AC2000SD” MAGNETIC CHUCK w/SD CONTROLLER - 19 SUPPORT BLOCKS

58" X 26" ALPHA-MAGNETS MAGNETIC CHUCK WITH CONTROLLER SERIAL NO 08G03.01, MODEL AC2000SD EQIPPED WITH: SD CONTROLLER (18) SUPPORT BLOCKS (3-ROWS OF 6) SPECIFICATIONS: Magnet, Length 58" Magnet, Width 26"

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & TAPPED ANGLE PLATE w/ADJUSTABLE EXTENSIONS

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & SLOTTED ANGLE-PLATE EQUIPPED WITH: (6) Slots On Face - (1) Slot On Top Threaded Mounting Holes Face & Top (4) Adjustable Mounting Arm Extensions (6) Eyebolts GENERAL SPEC...

2-1/2" X 10' (120”) SPEGO "506-20” TURNMATIC 5-SPINDLE HYDRAULIC BAR-FEED w/SELF-CONTAINED HYDRAULICS - (2) HEAVY-DUTY SUPPORT STANDS

• Manufacturer: Spego

2-1/2" SPEGO "TURNAMIC 506" 5-SPINDLE BAR-FEED Serial No 96-06-481, Model 506-20 EQUIPPED WITH: Hand And Auto Controls Forward And Reverse Controls Self Contained Hydraulic System (2) Heavy-Duty Support Stands CA...

Sandvik Coromant A260-425M-1 Face Mill Auto Support Body Tool Holder

• Manufacturer: Sandvik

New surplus. If this item ships as Flat Rate Freight please see details in Shipping tab

Niagara Ring And Circle Shear Z20058A

• Manufacturer: Niagara
• Model: 13RC

3 1/2" - 44" Circle Diameter Range 1 5/8" Diameter Of Cutters 34 1/2" Tail Stock Depth 9.25" Head Throat depth Capacity 16 Gauge mild Steel 1/2HP Motor Foot Pedal Control

Bleacher Boss

• Manufacturer: Boss

The Bleacher Boss is what you need to move your bleachers. Powered bleacher tool to move manual bleachers in and out. Used but in good condition.

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26784 AND 26785 ALSO.

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26784 ALSO.

2012 2.56" X 60" MTA INTERNATIONAL "V65LE" SERV0-FEED AUTOMATIC BAR-FEED w/INCLINED LOAD FEEDER - HAND HELD PLC CONTROL -

• Manufacturer: MTA

#V65LE MTA INTERNATIONAL AUTOMATIC BAR-FEED NEW 2012, SERIAL NO 16120339, MODEL V65LE EQUIPPED WITH: HAND HELD CONTROL PLC CONTROL SERVO-FEEDING INCLINED LOADER FEED TABLE CATALOG SPECIFICATIONS: Round Bar Stock ...

1941 10" KEARNEY & TRECKER DIVIDING HEAD

• Manufacturer: Kearney & Trecker

10" KEARNEY & TRECKER DIVIDING HEAD SERIAL NO. 3/3254, NEW 1941, MODEL K Equipped With: One Index Plate That Is On It (We Have No Others)