Used Foundry & Casting

STOLLE - Cast Iron

Floorplate length: 3980 mm | Floorplate width: 1500 mm | Height: 300 mm | No. of t-slots: 6 | Distance from t to t-slot / jump: 250 mm | T -slot size: 35 mm | Weight a plate approx.: 4700 kg | Number of ma...

Ingots casting conveyors

Ingots casting conveyors composed of: - with one model for (the ingots

Casting ladle, ± 1200 kg

With oilbath gearbox, good ladle cup and good lining

Old gravity casting machine

Length of frame (on 4 feet) 1900 mm

Casting ladle SENSENBRENNER, ±2,6t

• Manufacturer: Senssenbrenner

External dimesions: Length: 1750mm; Width: 1400mm; Height: 2200mm Useful dimensions: Ø970mm; Height: 950 (without refractory) With planetary gearbox wWth 2 teapots With heat shield With useful lining

horizontal centrifugal casting machine VEB

Motor VEM DDR, type ring CLU 296/4-FW15Z, 3,33 /10 kW, 220/380 V, 650/1950 rpm Each with a different shell diameter Available: 8 x Ø 230-231 mm, length 400 mm 1 x Ø 160-161 mm, length 440 mm With mechanical brake...

Casting ladle COLLIN, 2,7 t

With aerated suspension ring Weight: ± 1200 kg | External dimensions: width ± 1750 mm, h. 1956 mm | Useful dimensions: Ø 1000 mm, h. 1120 mm

Casting ladle ROPER, 4 t

With Oilbathgearbox Building year: 1988 | Weight: 3000 kg

OSKAR FRECH - DAW 50 S D - Casting Machine

• Manufacturer: Frech

Manufacturer: Oskar Frech GmbH & Co. (Germany) Model: DAW 50 S D Year of Make: 1996 Serial number: 159 501 Category: Hot Chamber Die Casting Machine (Zinc/Magnesium) Main data: Clamping force: 600 kN Hydraulic op...

OSKAR FRECH - DAW 50 S DV - Casting Machine

Manufacturer: Oskar Frech GmbH & Co. (Germany) Model: DAW 50 S DV Year of Make: 1998 Serial number: 159 904 Category: Hot Chamber Die Casting Machine (Zinc/Magnesium) Main data: Clamping force: 600 kN Hydraulic o...

Casting ladle 2,5 t, COLLIN

With oil bath gearbox In good condition Outside: width 1900 mm, h. 2000 mm | Inside: Ø 1000 mm, h. 1000 mm | Weight: ± 800 kg

Casting ladle COLLIN, ± 2 t

On 3 feet (Has been used for desulphurisation) Weight: ± 700kg | Outside dimensions: L. 1770 mm, h. 2080 mm | Useful dimensions: 945 mm, h. 990 mm

Casting ladle ACETARC, 7 t

With oilbath gearbox, worm wheel and shaft number 4 With two spouts, without lining

Casting ladle motorized 20t, IBW

• Manufacturer: IBW

With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the overside With mechanical switch to "tilting by hand" With useable lining and 2 pour...

Motorized casting ladle, 20 t, IBW

Year of construction: 2004 Weight: 12 000 kg with out the lining 6380 kg. With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the oversi...