Used Presses in Lombardy, Italy

ERFURT PRESS 250t

• used

• Manufacturer: Erfurt

MYOS T105-TR PRESS

• used

• Manufacturer: Mios

MIOS 10147 SWAN NECK PRESS Nominal force: kN 1,050 Mass: kg 6,400 No. of nominal strokes: 60 min. Working air pressure: BAR 4.3÷5.5 Installed power: KW 7.5 Min./max. stroke: mm.15/140 Projection: mm310 Min./max. ...

MOSSINI PRESS 250 TON

• used

• Manufacturer: Mossini

MOSSINI 10141 MOSSINI OLEODYNAMIC PRESS mod. PO/2M/P 250 Nominal force Ton 250 Slide stroke mm 1,000 Worktable dimensions mm 2,500 x 2,000 Max. workpiece dimensions mm 2,400 x 1,900 Max. workpiece weight kg 5,000...

MILLUTENSIL PRESS MOD.MIL 143

• used

• Manufacturer: Millutensil

MILLUTENSIL 10128 MILLUTENSIL MIL 143 MOLD TESTING PRESS Useful table length mm 1400 Useful width of table mm 1200 Max passage between columns on length mm 1540 Max passage between columns on the width mm 1300 T-...

SANGIACOMO T63R CE PRESS

• used

• Manufacturer: San Giacomo

SANGIACOMO 09976 SWAN NECK PRESS Nominal force: kN 630 Adjustable stroke: mm.10÷140 Stopping position: P.M.S Mace adjustment: mm.70 Strokes per minute: no.70 Installed power: KW 5.55 Voltage: V400 Auxiliary volta...

SANGIACOMO T80R CE PRESS

• used

• Manufacturer: San Giacomo

SANGIACOMO 10194 SWAN NECK PRESS Nominal force 800 kN Nominal force stroke 5 mm Cycles per minute 65 cycles / min Stroke adjustment range 14 : 150 mm Stop time (at 65 cycles/min) 154 ms Slide adjustment 85 mm Sli...

FICEP BALANCE SCREW PRESS

• used

• Manufacturer: Ficep

FICEP 10033 OVERHAULED SCREW PRESS (BALANCER) NOMINAL FORCE kn 10,000 mod. PVM315 Force kn 20,000 Screw diameter mm 315 Max useful energy Kgm 12,000 Slide stroke mm 500 Theoretical strokes at 1' No. 26 Vertical s...

PROOFING PRESS PFC PR2

• used

PFC 09950 USED MOLD TESTING PRESS Removable and tilting table Closing force max Ton 20 Max opening force Ton 10 Upper table dimensions mm 750x1100 Lower table dimensions mm 750x1100 Opening min max 85- 985 Movabl...

SANGIACOMO T130R CE PRESS

• used

• Manufacturer: San Giacomo
• Model: T130R

SANGIACOMO 10103 SWAN NECK PRESS Nominal force: kN 1300 Nominal stroke: mm.7.5 Adjustable stroke: mm.16÷200 Stopping position: P.M.S Mace adjustment: mm.100 Stopping time: Ms 190 Min./max. strokes per minute: 10/...

OMCN 10 TON BRIDGE HYDRAULIC PRESS

• used

• Manufacturer: OMCN

WITH MANUAL PUMP

RUSSIAN PRESS ETC. 40/50 TON WITH PNEUMATIC FRICTION

• used

• Manufacturer: PRESSA ECC.DA 40/50 TON RUSSA A FRIZIONE PNEUMATICA

WORKING MACHINE WITH OUR ELECTRIC SYSTEM IN THE CONSOLE, IT DOES SINGLE/PULSE/CONTINUOUS DOUBLE BUTTON PANEL WITH EMERGENCY BUTTON BALANCING CYLINDERS ON THE CLUBS, AIR RESERVE TANK DOUBLE BODY SOLENOID VALVE...

PNEUMATIC FRICTION PRESS ROSS 100 TON CE

• used

• Manufacturer: Ross

4 GUIDE HAMMER, 540X350 HAMMER TOP, 930X660 WORKTOP, FULL OPEN LIGHT 500, AUTOMATIC LUBRICATION, BALANCERS, COMPLETE CASES WITH SAFETY MICRO, MOBILE PUSHBUTTON PANEL, OIL BATH GEARS DIMENSIONS 1200X1700XH2900...

HYDRAULIC PRESS OMB 63 #ITA4020

• used

TABLE 750X700,ALL OPEN LIGHT700,POKER TOUR FULL METAL AWARDS

HYDRAULIC 20/30 PRESS #ITA 1221

• used

STROKE350,EQUIPPEND TO BEND70X10 PLATE EDGE ON

HYDRAULIC BENAG 400 PRESS #ITA 1322

• used

LIGHT BETWEEN SHOULDERS500X500, STROKE CYLINDER600,ALL OPEN LIGHT700