Used Hydraulic Presses in Flanders, Belgium

Vermeulen Hydraulic press

• Manufacturer: Vermeulen

Hydraulic Tube endforming press Capacity: 8 Ton | Max ram adjustment: 120 mm | Passage between uprights: 400 mm | Distance between table -- ram: 1000 mm

Quiri 150 ton Dish end forming press

• Manufacturer: Quiri 150 ton

This portalpress is suitable for the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness. Machine Height: 4200 mm (600mm in floo...

HL 450 ton 4 column press

• Manufacturer: HL

4 column hydraulic press high closing speed ideal for composite projects press can remain under pressure for a long period of time one main hydraulic single acting piston two smaller pistons to retract the stamp ...

HL 1000 ton 4 column press

• Manufacturer: HL

4 column hydraulic press high closing speed ideal for composite projects press can remain under pressure for a long period of time one main hydraulic single acting piston (diameter 660 mm) two smaller pistons to ...

Favrin rupture discs for folding press

• Manufacturer: Favrin

cast iron rupture disc for Favrin folding press gietijzer breekplaten voor Favrin vouwbank dem-rondelles de sécurité en fonte pour plieuse Favrin

1971 LVD MV-4 Hydraulic Press

By decoupling copper

Forming Station with Plate Roll and Hydraulic Press 1200x8mm

• Manufacturer: Pinchart Deny and LISSE

Machine type: Forming station with plate roll and hydraulic press Plate roll: LISSE - Model: Cb-Cq-B40 - Working width: 1200 mm - Max thickness: 8 mm - Material grade: Steel A42 - Max pressure: 26 bar Hydrauli...

Imac Forging 750 ton

• Manufacturer: Imac

High Speed hydraulic Die Forging Press Capacity: 750 Ton New/ Unused, machine was never mounted... Stroke: 400 mm Max. opening: 810 mm Between coloms: 500 mm Table: 900 x 500 mm Power: 75 kW dimensions: 2800 ...

Favrin 100 ton Plateroll / Dish end forming

• Manufacturer: Favrin 100 ton

Ideaal voor het vervormen van stalen platen voor schepen. De vloeigrens van een plaat wordt overbelast om een permanente vervorming te creëren en de krimpspanning in de plaatranden, veroorzaakt door het vlamsnijd...

Wemhörner VSF 600 ton sandwich panelpress

• Manufacturer: Wemhörner VSF

Hydraulic heated sandwichpanel press (discontinuous) max open: 170 mm max workpiece width: 2320 mm max workpiece length: 7000 mm both upper and lower table heated lower table equipped with heatresistant teflon ...

Tranemo DPA 250-25 CNC

• Manufacturer: Tranemo

2 axis speed at 250 ton: 15 strokes/min speed at 88 ton: 36 strokes/min between columns long side: 2500 mm between columns short side: 800 mm This Tranemo features: - automatic hydraulic clamping system for the...

Demets 80 ton

• Manufacturer: Demets

4 heated plates 4 hydraulic cylinders Max opening with only two tables: 400 mm