Used Lathes in Lombardy, Italy

1980 WICKMAN 1“-6 multi-spindle lathe

• Manufacturer: Wickman

Multi-spindle automatic lathe Bar diameter: Feed stroke: On main tool block: 0 - 63.5 mm - On independent slides: 0 - 63.5 mm. Approach stroke on main tool block: Normal 63.5 mm - Special 50.8 mm. Cross slide fee...

LINDERMAIER lathe type TORNOS 125

• Manufacturer: Tornos

Cam-type sliding headstock lathe Type Tornos 12.5 Lindermaier + transfer various units. No. 4 vertical units: drilling/threading. No. 5 horizontal units: Bar passage: 12.2 mm. Rotary table: 10 positions. Clamps w...

1969 GILDEMEISTER lathe AS 32-6

• Manufacturer: Gildemeister

Multi-spindle automatic lathe No. 6 spindles. Feed: Maximum bar feed: 175 mm. Maximum turning length: 100 mm standard. Maximum longitudinal slide travel: 125 mm standard. N. 12 toolholders . Devices and Accessori...

ZMM 165X1000 LATHE

ZMM 08914 PARALLEL LATHE MOD. CU 325 WORKING RANGE: Height of centers 165 mm Rotating diameter over the bed 325 mm Rotating diameter over the carriage 165 mm 190 Rotating diameter in the notch: 440 mm Bed width: ...

INDEX 25 single-spindle lathe

Single-spindle automatic lathe Year of production:

2003 GILDEMEISTER GMC 35 ISM lathe

• Manufacturer: Gildemeister

Multi-spindle automatic lathe No. 5 cross slides For machining in X / Z. Freely programmable robot For gripping finished parts. No. 5 frontal spindles 4 of which are NC-driven. Front spindles static and motorized...

SCHUTTE SF32-6 multi-spindle lathe

• Manufacturer: Schutte

Multi-spindle automatic lathe 6 spindles. Bar diameter: 32 mm. Diameter between spindle axes: 300 mm. Bar feed: Cross slide travel: Number of spindle speeds: 49 Spindle speed: min 200/min. - max 3150/min. Working...

2002 GILDEMEISTER GMC 35 ISM Lathe

• Manufacturer: Gildemeister

Multi-spindle automatic lathe 5 cross slides For X / Z machining. Pick-up Spindle: in position 6. Freely programmable robot For pick-up of finished parts. 5 front spindles 4 of which are NC operable. 1 complete m...

GIANA GF 12 CNC FACING LATHE

• Manufacturer: Giana

Saddle travels: 1.200 x 650 mm. Complete with: - hydraulic self centering chuck Ø 500 mm. - automatic square turret

TAILSTOCK LATHE GRAZIANO

• Manufacturer: Graziano

08673 TAILSTOCK FOR GRAZIANO SAG 210 point height mm 210 Manual and hydraulic tailstock Duplomatic hydraulic system MATERIAL USED

TAILSTOCK LATHE GRAZIANO

• Manufacturer: Graziano

08675 Tailstock for Graziano SAG 210 Point height mm 210 Manual and hydraulic tailstock Duplomatic hydraulic system USED EQUIPMENT

FIXED LATHE BEZEL

07228 MAX DIAMETER mm 1400 USED EQUIPMENT

GIANA GF 12 CNC FACING LATHE

• Manufacturer: Giana

Retrofitted in 2000. Saddle travels: 1.200 x 650 mm. Complete with: - hydraulic self centering chuck Ø 900 mm. - automatic square turret - chipconveyor - full-covered

CRAVEN 80,5 FOUR SLIDES BED LATHE

• Manufacturer: CRAVEN

Complete with: - n. 1 four jaws table Ø 3.660 mm. - n. 2 closed steadies Ø 305 ÷ 1.016 mm. - n. 2 special supports for crank shafts - upper saddle for threading - crank shafts turning device

BELT GRINDING FOR LATHE

09930 DYNABRADE MOD. 64993 230 V - 50 HZ - 1 phase 4500 SFPM MATERIAL USED