Processing » Heat Exchangers » Plate Heat Exchangers » Netherlands

Search By Manufacturer

Search By Province

Building Filters

266

Used Plate Heat Exchangers in Netherlands

  • Trusted Seller
    Armfield FT 43-A-A

    Armfield FT 43-A-A

    • Manufacturer: Armfield

    Armfield Laboratory Pasteurizer FT 43A. With controls. Set consists out of feed tank, pump, plate heat exchanger, hot water tank, pump, holding and diverter valve. Total dimensions: 76x55x65 (lxwxh) cm - weight ...

    Lopik, Netherlands
  • Trusted Seller
    1991 GEA Ahlborn VT 4

    1991 GEA Ahlborn VT 4

    • Manufacturer: GEA

    Plate heat exchanger, sanitary (PHE). Max working pressure: 6 bar. Beam length: 165 cm, connections: 4x2" Din. Current configuration: 1 Section: 50 plates. Connections follower: 2 up/2 down. Dimensions: 38x17,5x5...

    Lopik, Netherlands
  • Trusted Seller
    2009 Alfa Laval Front 8-RH

    2009 Alfa Laval Front 8-RH

    • Manufacturer: Alfa-Laval

    Plate heat exchanger, sanitary (PHE). Pressure: 16,0 bar, Beam length: 120 cm, connections: 4x3" DIN. Current configuration: 1 sections: 81 plates. Design temperature 0/120 °C. - Connections head: 2 down, followe...

    Lopik, Netherlands
  • Trusted Seller
    2013 Alfa Laval Front 8

    2013 Alfa Laval Front 8 RM

    • Manufacturer: Alfa-Laval

    Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - beam length: 180 cm, connections: 8 x 3" Din. Currenct configuration: 3 Sections: 37-48-36 plates (total 121 plates) - Connections head: 2 up and 2 down,...

    Lopik, Netherlands
  • Trusted Seller
    2003 Schmidt Sigma 37 TBV

    2003 Schmidt Sigma 37 TBV

    • Manufacturer: Schmidt
    • Model: Sigma 37

    Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar. Beam length: 150cm, connections: 9x 3" SMS. Current configuration: 3 Sections: 22-91-22 plates (total 135 plates). Connections head: 2 up, follower 2 up. ...

    Lopik, Netherlands
  • Trusted Seller
    1993 APV K 55

    1993 APV K 55

    • Manufacturer: APV
    • Model: K 55

    Plate heat exchanger, sanitary (PHE). Pressure: 10 bar, Beam length: 147,5 cm, Connections: 4x4" DIN. Currenct configuration: 1 Section: 105 plates - Connections head: 2 down, follower 2 down. Dimensions: 130x80x...

    Lopik, Netherlands
  • Trusted Seller
    1993 Alfa Laval CLIP 8-RM

    1993 Alfa Laval CLIP 8-RM

    • Manufacturer: Alfa-Laval
    • Model: CLIP 8-RM

    Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar. Beam length: 180 cm. Connections: 2x 2" Din and 10x 3" SMS. Current configuration: 4 Sections: 17-18-18-24 plates, in total 77 plates. Connections head: 2...

    Lopik, Netherlands
  • Trusted Seller
    2000 GEA Ahlborn VT40 BC-16

    2000 GEA Ahlborn VT40 BC-16

    • Manufacturer: GEA
    • Model: VT40 BC-16

    Plate heat exchanger, sanitary (PHE). Max working pressure: 10 bar - Max working temperature: 100 °C. Beam length: 194 cm, connections: 4x DN100 Din - 2 x DN65 Din. Current configuration: 2 Sections: 73-87 plates...

    Lopik, Netherlands
  • Trusted Seller
    1995 Alfa Laval Clip 10

    1995 Alfa Laval Clip 10

    • Manufacturer: Alfa-Laval
    • Model: CLIP 10

    Milk thermiser/pasteuriser for Full fatt milk, full automatic. Exisiting out of: Centrifugal pump feed pump to the pasteuriser, inlet filter, Balance tank with 3 level sensors, spraybowl for cip, 3 level sensor. ...

    Lopik, Netherlands
  • Trusted Seller
    Alfa Laval M10

    Alfa Laval M10

    • Manufacturer: Alfa-Laval
    • Model: M10

    Current configuration: 1 Section. Connections: head: 2 up and 2 down, follower 0.

    Lopik, Netherlands
  • Trusted Seller
    1995 Alfa Laval CLIP10-RM

    1995 Alfa Laval CLIP10-RM

    • Manufacturer: Alfa-Laval

    Pressure: 10 bar. Current configuration: 1 Section. Connections: head: 2 up, follower 2 up.

    Lopik, Netherlands
  • Trusted Seller
    2010 Alfa Laval C8

    2010 Alfa Laval C8

    • Manufacturer: Alfa-Laval

    Plate cooler, 2 sections, 90-36 plates. Connections: Head 2 Up, Follower 2 down.

    Lopik, Netherlands
  • Trusted Seller
    Swep B60Hx60IP-SC-M

    Swep B60Hx60IP-SC-M

    • Manufacturer: Swep

    Plate heat exchanger, non-sanitary (PHE). Max pressure: 36-45 bar. Connections: 2 x 2" Din and 2 x 2.5" Din. Current configuration: 1 section, compressed plate package. Connections head: 2 up/2 down. Has been tes...

    Lopik, Netherlands
  • Trusted Seller
    Alfa Laval

    Alfa Laval

    • Manufacturer: Alfa-Laval

    Water pump set (originally or cream pasteurizer). Set equipped with 2 x Grundfos circulation pumps (CRNS-6-A), with 2 x SS Joval pressure vessel (type 50 VIM, capacity 50 ltr.) with 1 x plate heat exchanger, non-...

    Lopik, Netherlands
  • Trusted Seller
    1994 Alfa Laval Clip 10-RM

    1994 Alfa Laval Clip 10-RM

    • Manufacturer: Alfa-Laval

    Pressure: 10 bar. Beam length: 3000 mm. Connections: 4 "SMS. Current configuration: 1 Section: no plates (plates alreadys dismantled). Connections head: 2 up, follower 2 under.

    Lopik, Netherlands
56789

Overview

Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

FAQ

What factors should I consider when purchasing a heat exchanger?

Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

How can I ensure my heat exchanger is shipped safely?

Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

What maintenance is required for a heat exchanger?

Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.