1994 FRECH MOS 5/20 U
- Manufacturer: Frech
Used furnace for use on DAW5 or DAW20 die casting machines without furnace cabinet
Schorndorf, Germany
2004 Robamat 5201
- Manufacturer: Robamat
Used heating device from Robamat for use on die casting machines. This single-circuit device is designed for temperature control of a die casting tool with oil. Dismantled from ongoing production. The device was ...
Schorndorf, Germany
1998 FRECH Weightcontrol 2000
- Manufacturer: Frech
Used scales for use on die casting machines up to a unit weight of 2000gr. The device was checked and repaired by the manufacturer. Weighing cell and control board replaced
Schorndorf, Germany
2001 FRECH M200/120
- Manufacturer: Frech
Used machine furnace make Meltec type M 200/120 for use on hot chamber die casting machines make Oskar Frech with 200 tons for processing magnesium alloys. Melting capacity per hour 120kg/h 54 kW connected load. ...
Schorndorf, Germany
2024 FRECH W200Zn-ST
- Manufacturer: Frech
Equipment of the machine 1.1.1 Motorized safety gate on the right in the casting direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - energy efficiency 2.0.1 Ejector assista...
Schorndorf, Germany
2003 Frech Espana DAW 125 PD SBC3
- Manufacturer: Frech
Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant
Schorndorf, Germany
1995 FRECH DAW 200S
- Manufacturer: Frech
Used die casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available by arrangement The manufacturer recommends a general overhaul in the overhaul plant. This can be carried out on requ...
Schorndorf, Germany
1999 FRECH DAM 315 S
- Manufacturer: Frech
Used die casting machine DAM 315 S with Datacontrol control for the use of magnesium alloys. Available from used machine stock. The machine is equipped with a Rauch type MMO 315E electric furnace. Without sprayin...
Schorndorf, Germany
2017 ROBAMAT 2212
- Manufacturer: ROBAMAT
Used Robamat heating and cooling unit for use on die casting machines. This dual-circuit device is designed for the temperature control of a die casting tool with water. The device was checked, serviced and repai...
Schorndorf, Germany
2014 FRECH ZC200/250
- Manufacturer: Frech
Used machine furnace make Meltec type ZC 200/250 for use on hot chamber die casting machines make Oskar Frech DAW 200 for processing zinc alloys. Melting capacity per hour 250kg/h 36 kW connected load. Switch cab...
Schorndorf, Germany
2024 FRECH W80Zn-RC
- Manufacturer: Frech
Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...
Schorndorf, Germany
2000 FRECH DAW 80S
- Manufacturer: Frech
Overhauled die casting machine DAW 80 GO on DataLogic control for the use of zinc alloys. Available on request.
Schorndorf, Germany
2020 FRECH W50Zn-RC
- Manufacturer: Frech
Equipment of the machine 1.0.1 Locking part cover on the base frame 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4...
Schorndorf, Germany
1992 FRECH DAW 50
- Manufacturer: Frech
Used die casting machine DAW 50 with SBC2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with a Rauch MO50E electric furnace and a used Oskar Frech 401 pneumatic sp...
Schorndorf, Germany
1994 FRECH DAW 50
- Manufacturer: Frech
Used machine DAW 50 as a basis for a general overhaul without control cabinet, without oven and oven cabinet A general overhaul can be carried out at the manufacturer's overhaul plant. The scope of the overhaul c...
Schorndorf, Germany
Tip: Enter manufacturer, model or keyword