Used Foundry & Casting in Wallonia, Belgium

Liquid iron analyser Digitemp-E

Brand: Electro-Nite, Type: DTE-A-50; Serial number: 014402 Exterior dimensions: Length 240mm x Wide 200mm x Height 145mm Power 21VA With foot for cups with last Calibration certificat in german

Drum ladle ± 0,85 - 1T

• Manufacturer: Odermath

External dimensions: Length 1550mm x width: 830mm x height 1760mm Inner dimensions: Wide: 800mm, Ø 600 mm With planet gearbox and heat protection Good lining For handling by rollovercrane and forklift

Jolt-squeeze moulding machine ZIMMERMANN GO/2B

• Manufacturer: Zimmermann

This machine shakes under pressure Press pressure: 3000 kg | Payload: max. 120 kg | Weidth max. moulding boxes: 450 mm | Table size: 570 mm x 430 mm | Press stroke: 90 mm | Lifting stroke: max. 150 mm

Laboratory surface plate

Dimensions: Lenght: 475mm Witdh 475mm; Hight: 60mm

2014 Small freezer FRYKA, minus 50 ° Celsius

• Manufacturer: Fryka

Serial number 49907-09-14 External dimensions: length 600 mm, width 400 mm, height 700 mm Digital control

Pyrometer SIDERPORT

With battery and charger Weight: ± 3 kg | Dimensions: length 1330 mm, width 120 mm, height 250 mm

Pouring ladle COLLIN, ± 1000 kg

External dimensions: length 1400 mm, width 830 mm, height 1500 mm With ventilated suspension ring With oil bath worm gear

Continuous no bake mixer 30 t/h REISAUS & BAUMBERG

Engine: 20 kW, 400 V, 50 HzProjection arm 1: 5500 mmDischarge mixing screw: 2500 mmMotor mixing screw: 18 kWMixing capacity: 30 t / hWith 2 pumps resin / catalysatorWith 2 product containers and retention bacsCon...

1981 Eirich mixer, type DEV 22, capacity 2250 l

• Manufacturer: Eirich
• Model: DEV22

With bottom-mounted disc feeder Turbine motor 92 kW (At the moment without discharge flap and hydraulic unit) Currently designed as a continuous mixer Can also be used as a batch mixer after overhauling

RÖPER H 1 overhauled and modernised with cabin

• Manufacturer: Laempe / Röperwerk

Manual adjustment of the shooting head heightTable size: 200 mm x 400 mmOriginal RÖPER clamping systemWith pivotable gassing plate (pneumatic moved)With manually opening front doorElectric Control: SIEMENS LOGOWi...

2000 Manipulator CLANSMAN, type C510 E2.35

Series N° PG53 With hydraulic unit With pincer Weight: ± 5 t | Range: max. 5890 mm / min. 2385 mm | Height: max. 5000 mm | Lifting capacity: total 800 kg | Payload: 500 kg

2007 Sand feeder 31 liters, KLEIN

External dimensions (as double item): 1400 mm x 1000 mm, h. 1600 mm External dimensions (single item): 550 mm x 550 mm, h 1600 mm Sandinlet Ø 145 mm Sandpipe Ø 100 mm With control valves Sends air from below and ...

1992 Treatment ladle with teapotspout ACETARC, 750 kg

External dimensions: length 1400 mm, width 900 mm, height 2050 mm With new lining With gearbox N°2

Precisions scale pocket model, max 20 gr

• Manufacturer: Voltcraft

With manual instructions and calibration weight Minimum 0,02 gr Maximum 20 gr

Grinding table 2000 mm x 1030 mm x 880 mm

External dimensions: length 2100 mm, width 1180 mm, height 2100 mm Inner dimensions: length 2000 mm, width 1030 mm, height 880 mm Pipe section Ø 225 mm With lightening connection