Used Bottling, Filling & Packaging in North Carolina, USA

Inline Accumulation Table Conveyor System

Stainless Steel Construction Infeeds at Single Lane, Switches to Mass Flow and then divides back to dual single lane discharge Plastic Matte Top Conveyor Infeed Height of 41 1/2 inches Approximately 18 feet long ...

Elgin Cozzoli RPF-16

• Manufacturer: Cozzoli

Currently setup for 32oz. Jars Change Parts available for 8oz. Jars Spare Parts and Manual Included Allen Bradley PLC and HMI Operator Touchscreen

SJI 10 x 20

• Manufacturer: SJI

Stainless Steel Construction, Plastic Intralox Bed measures 10 feet wide x 20 feet long, Last setup for 12oz. cans running 900 cans/minute, NEW Goulds Pump in 2022, New Control Panel in 2022 with Allen Bradley Po...

2012 GC Evans 6016

• Manufacturer: Evans

Stainless Steel Construction, Plastic Intralox Bed measures 6 feet wide x 16 feet long, Includes Pumps, Control panel with Allen Bradley PLC, Air knife discharge, Last ran Alumi-Tek Bottles at 500 BPM, Infeed and...

Busse 10 x 20

• Manufacturer: Busse

Last use: PET Bottles – Carbonated Soft Drinks | Dimensions: 25 x 10 x 10 overall

SEW KT37DE90L6

• Manufacturer: SEW-Eurodrive

1 Horsepower, Like New Condition, Last used in Bottling Plant for conveyor line, 230/460 Volts

2013 Crown / Alcoa 84-21

• Manufacturer: Crown

Standard Clockwise Rotation, Stainless Steel Frame and Carriage, Last ran 2L Every Valve – Carbonated Soft Drinks, Rated for 500+ BPM, Features Alcoa CSI 21 Capper for 28mm, BEV904-VS-17+2A SUPER BEVFLOW II Filli...

A&E Conveyor Systems AV-C750

• Manufacturer: A&E

Stainless Steel Construction, Uses Ionized Air to Clean Cans prior to filling, Last supporting a Crown 72 Valve Can Filler running 12oz. cans around 700 CPM, Very Good Condition, Multiple Sets of Cages for Differ...

Fogg 54-18

• Manufacturer: Fogg

54 Valve Rotary Filler, CSI 18 Head Plastic Capper Turret setup for 28mm Plastic Caps (Model: 200E-FG2233-18-HT6), Includes Vacuum Barrier Corporation Nitrogen Doser, Right to Left Counter Clockwise Rotation, Sta...

2010 Sentry 3.25 Inch

• Manufacturer: Sentry

3.25″ Matte Top Chain, Stainless Steel Frame, Est. 240 Feet Straight Sections, Hood Covers for Empty Bottles, Approx. 11 Crossover Transition Drives Included, 2 Vacuum Blowers near discharge to prevent bottles fr...

2022 Codi Lowerator for Cans – New

• Manufacturer: Codi

Stainless Steel Construction Last running 12oz. Cans Infeed Height at 108 Inches – Discharge at 65 Inches Includes 3.25″ Conveyor and Drive Electrical Panel Included

Crown – Angelus Uniblend 60 – 120L

• Manufacturer: Angelus
• Model: 120L

Last ran carbonated soft drinks on 8.4oz slim cans up to 800 cans per minute, Last ran a 202 diameter body x 200 lid x 415 height can, Filler and Seamer have been well maintained, Filler and Seamer are mounted on...

Filler Specialties 24-8

• Manufacturer: Filler Specialties

24 Valve Bottle Filler with 8 Head 28mm Screw Capper, Capable of Water, Milk, Hot Fill Juice, Stainless Steel Construction, Filler Specialties Waterfall Cap Feed Hopper and Cap Chute, .5L Change Parts, Speeds up ...

Filler Specialties 30-10

• Manufacturer: Filler Specialties

30 Valve Bottle Filler with 10 Head 28mm Screw Capper, Capable of Water, Milk, Hot Fill Juice, Stainless Steel Construction, 1L Change Parts, Speeds up to 200 Bottles/Minute, 28mm Flat Plastic Screw Caps, Control...

Sidel CF 20/24

• Manufacturer: Sidel

Last running 28mm Plastic Caps, Last used to support Crown 100 Bottle Filler, Stainless Steel Construction, Allen Bradley MicroLogix 1200 PLC and PowerFlex VFD Drive, Last in Service March 2025, Right Hand Discha...