Building Filters
- Trusted Seller
2002 NETSTAL SYN 1500-460
- Manufacturer: Netstal
Clamping force: 150 to | Stroke volume: 201 cm3 | Ejector stroke: 150 mm | Ejector force: 49 kN | Pressure on material: 2218 bar | Screw diameter: 40 mm | From: 20 t/min | Up to: 300 t/min | Mould heating: 20 kW...
Brügg, Switzerland - Trusted Seller
1995 DEMAG Ergotech System 250 - 1450
- Manufacturer: Demag
- Model: Ergotech
This DEMAG Ergotech System 250 - 1450 was manufactured in 1995. A robust hydraulic injection moulding machine, it features a clamping force of 2500 kN and a screw diameter of 70 mm. It's equipped with a Sepro rob...
Switzerland - Trusted Seller
2019 DEMAG El-Exis SP 350/820-2500
- Manufacturer: Demag
This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. W...
Switzerland - Trusted Seller
2018 DEMAG El-Exis SP 200/560-675
- Manufacturer: Demag
This DEMAG El-Exis SP 200/560-675 was manufactured in 2018. It features a screw diameter of 40 mm, a maximum dosing volume of 255 ccm, and a clamp force of 2000 KN. The tie bar distance is 560 mm, and it has a to...
Switzerland - Trusted Seller
2018 DEMAG El-Exis SP 420/820-2500
- Manufacturer: Demag
This DEMAG El-Exis SP 420/820-2500 was manufactured in 2018. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a maximum dosing volume of 891 ccm, and a clamp force of 4200 KN...
Switzerland 
Horn, Switzerland
31143 ENGEL Quick fixing bolts D95x165
- Manufacturer: Engel
Quick Fixing Bolts for bigger injection molding machines to fix the mold in short time with the integrated mold fixing option in the injection molder.
St. Gallen, Switzerland
31132 ENGEL Plasticizing cylinder&Screw Dia 105
- Manufacturer: Engel
Injection unit consisting of cylinder, screw, cylinder head and back flow valve, fully equipped with heater bands and thermocouples. Ready to use. Cyl. No. 70541, Drawing No. 0401-300-02-01. Screw No.70922, D...
St. Gallen, Switzerland
Horn, Switzerland
1992 ENGEL 250-1300 HL CC90
- Manufacturer: Engel
- Model: 250/1300HL
Angel 130t / 1300kN Handling Quick clamping
Horn, Switzerland
Horn, Switzerland
Horn, Switzerland
Horn, Switzerland
1983 ENGEL 600-105 ES105/600 CC80
- Manufacturer: Engel
Engel 105t / 1050kN very well maintained, sold due to business. Low number of operating hours Extensive equipment: -Quick-clamping system with clamping pin -Temperature control device interface -Wear-resist...
Horn, Switzerland
ENGEL 80-330 80/330 CC90
- Manufacturer: Engel
- Model: 330/80
Engel 80t / 800kN very well maintained, sold due to business. Low number of operating hours Extensive equipment: -Quick-clamping system with clamping pin -Temperature control device interface -Wear-resistan...
Horn, Switzerland
Demag Ergotech Injection Molding
- Manufacturer: Demag
- Model: Ergotech
Good condition Demag Ergotech Injection Moldings available between 1994 and 2002 years. Located in Hong Kong and other countries. Click request price for more information.
Hong Kong