Used Processing in Colorado, USA

KWS 60" Wide Combo Belt

• Manufacturer: KWS

The KWS 60" Wide Combo Belt Conveyor is a robust piece of equipment designed for efficient waste management and recycling operations. This used conveyor features a 60-inch-wide belt that provides ample space for ...

KVS-450-HD2-2C-RE Slide in unit

KV 450 Gallon Soup Can Style Slide in Unit. 300 Waste 150 Fresh. Powered by a Masport HD2 Propack Ultimate. Ready to ship from Denver, Colorado! KV 450 Gallon Soup Can Style Slide in Unit. 300 Waste 150 Fresh. – ...

KVS-800-HD2-2C-RE Slide in unit

KV 800 Gallon Soup Can Style Slide in Unit. 500 Waste 300 Fresh. Powered by a Masport HD2 Propack Ultimate. Pump Upgrades Available inquire Today! Ready to ship from Denver, Colorado! KV 800 Gallon Soup Can Style...

Unknown Manufacturer: Used 48" Infeed Conveyor

• Manufacturer: Unknown Manufacturer: Used

This used 48-inch infeed conveyor is a versatile piece of equipment ideal for handling trash and recycling materials. With a total length of 30 feet, it features an incline design, allowing for efficient transpor...

Lube Systems Inc. NFP-1-1-150-2-SS4

• Manufacturer: Lube Systems Inc.

Used large lube skid, has Plenty Products Inc. model-NFP-1-1-150-2-SS4, Basco heat exchanger, and Siemens 15hp electric motor

Lube Systems Inc. NFP-1-1-150-2-SS4

• Manufacturer: Lube Systems Inc.

Used large lube skid, has two Plenty Products Inc. model-NFP-1-1-150-2-SS4 good to 150mawp @ 200F, Basco heat exchanger, and Siemens 15hp electric motor

Lube Skid TYPE 500

• Manufacturer: Lube Skid

Heat transfer unit, part number 1503-05-036-038, size 05036, shell maximum working pressure 300psi, tube maximum working pressure 150psi, maximum temperature for shell and tube is 300 degrees fahrenheit.

Lube Skid TYPE 500

• Manufacturer: Lube Skid

Heat transfer unit, part number 1503-05-036-038, size 05036, shell maximum working pressure 300psi, tube maximum working pressure 150psi, maximum temperature for shell and tube is 300 degrees fahrenheit.

Power Zone Reclaimer 100

• Manufacturer: power zone equipment

Used 75 HP Mud Tank/Slurry Mixing Tank Hp: 75

Water heater -

• Manufacturer: Water Heater

Used, 210 degree 60GPM water heater, built by Hotsy, was with Detroit 3-53 serial number 03DB001182 Model 5033-5201 Stock #53855, FMC Bean pump belt drive gen

Pall Air Dryer T400DEA4-000BSN

• Manufacturer: Pall

Used 400 CFM @ 100PSI Rating. Year 1985, 150 PSIG Design Pressure, Temp. 90 F. with controls on feet. 460 Volts, 3 phase, Pall DEA Energy Tower Heat Activated, 460 V, 30 System Den Press 60 PSI @ 90*F, Bottles ar...

Tecogen - Screw Compressor

• Manufacturer: Tecogen

Used screw compressor, along with a Cotta gear increaser, was mounted on the front of Caterpillar D-399, built Aug 1987

Hallscrew HSO 2035 Screw Compressor

• Manufacturer: Hallscrew

Used Hallscrew compressor Volts: 115/120 | Ratio: 1.8500

Airmac QDD-25W Reciprocating Compressor

• Manufacturer: Airmac

Used upright air compressor on skid with electric motor mount and bottom half of belt guard and cracked heat exchanger

Abex Denison T6D 031 3R00 A1 Hydraulic Unit

• Manufacturer: Denison

Used hydraulic skid with Abex Denison T6D 031 3R00 A1 vane pump good for 5.68 cubic inches per rev, or 44 GPM @ 3,000 PSI continuous at 1800 RPM, has SAE #2 or 3 housing connections, tank, cooling fan, had 100 HP...