- Trusted Seller
Imcar Angle Roll - Cphv70
- Manufacturer: Imcar
- Model: CPHV70
Made In Italy, W/control Panel, (2325#) 56x50x49, (100#) 36x29x56, *contains 2 Pieces
- Trusted Seller
IMCAR 4RH 30/7 #1156422
- Manufacturer: Imcar
- Model: 4RH 307
Capacity: 1" | Pre bend capacity: 13/16" | Roll length: 144" | Center roll diameter: 18.1" | Lateral roll diameter: 16.1" | # of rolls: 4 | Hp: 30 | Weight: 33 TON
Toledo, OH - Trusted Seller
74" Imcar 4 Roll Plate Roll Z23052B
- Manufacturer: Imcar
4 Roll 74" Length Has Corrugated Roll Tooling. Was Making Basement Window Wells 7.5 KW/ 460V Estimated Weight 10,000
Monclova, OH - Trusted Seller
30" x 15 GAUGE IMCAR 4 ROLL PLATE ROLLER 18076B
- Manufacturer: Imcar
MODEL #: HT 10/96 SERIAL #: B3309 30" x 15 GA IMCAR 4 ROLL PLATE ROLL 30" MAXIMUM WIDTH 15 GA (2 MM) THICKNESS CAPACITY AIR DROP END YEAR: 2003 30 FPM SPEED 3.77" TOP ROLL DIAMETER 3.15" LATERAL ROLL DIAMETER ...
Monclova, OH - Trusted Seller
2009 Imcar CPHV-80
- Manufacturer: Imcar
- Model: CPHV-80
Flats, Hard: 3 x ⅝ Ø30 Flats, Easy: 5 x 1 Ø26 Square Bar: 1-¾ Ø22 Angle, Leg-out: 3 x ⅜ Ø42 Angle, Leg-in: 2-½ x 5/16 Ø42 Tee, Leg-out: 3 x ⅜ Ø34 Tee, Leg-in: 3 x 5/16 Ø36 C, Leg-out: 5 x 2 Ø28 C, Leg-in: 4 x 2 Ø...
- Trusted Seller
Milwaukee, WI Imcar 10′ x 1/2″ Hydraulic Plate Bending Roll
- Manufacturer: Imcar
1994 10′ x 1/2″ Imcar SIHR 12/5 Hydraulic Plate Bending Roll Capacity 10′ x 1/2′ Capacity, pre-bend 3/8″ Diameter of top roll 11″ Diameter of bottom rolls 10.25″ Motor 15 HP Approximate dimensions 198″ x 58″ x 58...
Waukesha, WI- Trusted Seller
Imcar HT/13/76 22 Gauge x 51″ 4-Roll Double Pinch Plate Roll
- Manufacturer: Imcar
Product Description General Info Stock #: 150250022 Location: Decatur, GA Brand: Imcar Model: HT/13/76 Serial #: B3411 Year: 2004 Approx. Shipping Weight: 1,250 Lbs. Approx. Shipping Dimensions: 8′ L x 3′ W x 5′ ...
Stone Mountain, GA - Trusted Seller
2001 IMCAR CPHV100 4" x 4" x 1/2"
- Manufacturer: Imcar
Angle leg out: 4" x 4" x 1/2" @ 48" Dia | Angle leg in: 4" x 4" x 3/8" @ 45" Dia | Solid square: 2-3/8 x 2-3/8 @ 48" Dia | Square tube: 3" @ 32" Dia | Flat: 7" x 1-3/8" @ 32" Dia | Round solid: 30″ Dia | Round s...
- USA
Imcar CPHV 130 Angle Roll Bender 2002
- Manufacturer: Imcar
Used Imcar CPHV 130 Angle Roll Bender 2002 Located in California Tons of Tools included 5” X 5” X ⅝” Angle Roll Hardened Driving Rolls and Hydraulic Guide Rolls GENERAL SPECIFICATIONS Round Bar: 3-½”Section Modul...
California, USA
IMCAR 2050mm x 130mm initial pinch bending rollers
- Manufacturer: Imcar
IMCAR 2050 m x 3mm power initial pinch bending rollers supplied with power rear bending roller top roll swings out extended shafts for section rolling. only tooling shown new emergency trip wire not shown fo...
Blackburn, United Kingdom- Trusted Seller
IMCAR - SIHR
- Manufacturer: Imcar
Extended end for profile bending rolls (Pipe & T-Angel) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardned rolls
Babberich, Netherlands - Trusted Seller
2002 IMCAR 4RH 15/11 – CNC Siemens OP 37
- Manufacturer: Imcar
Approximate machine dimensions: Rolling length: 6 200 mm | Thickness of the sheets for stainless steel material: 3 mm | Thickness of the sheets for aluminum material: 5 mm | Minimum rolling radius with 3 mm thick...
Sens-de-Bretagne, France - Trusted Seller
IMCAR - CPH 80
- Manufacturer: Imcar
Digiral read out position side rolls Set universal rolls included Hydraulic opperated
Babberich, Netherlands 
Imcar CPHV-80 Bending & Forming
- Manufacturer: Imcar
- Model: CPHV-80
Good condition Imcar CPHV-80 Bending & Formings manufactured in 2009. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
