Used agitators in West Virginia, USA

Arbo Engineering Feed Hopper with agitator

• Manufacturer: ARBO Engineering Inc.

ITEM #: 17234 Used Arbo Engineering Feed Hopper with agitator Overall dimensions: 32x42x75. 6-1/2"Ø inlet. All prices are FOB Millwood WV unless otherwise noted. Please contact us for alternate payment methods....

Arbo Engineering Feed Hopper with agitator

• Manufacturer: Arbo Engineering

Overall dimensions: 32x42x75. 6-1/2"Ø inlet. Size (cubic feet): 0

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

ITEM #: 01505.01 USED ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRIVE IS 1/3 HP 1725 RPM, 2...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

ITEM #: 01505.02 USED ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. 17.25" X 11" DISCHARGE. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRI...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

ITEM #: 01505.03 USED ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER CARBON STEEL CONSTRUCTION. 48" W X 46" LONG X 22" DEEP. TWO RIBBON TYPE SCREWS 20" DIAMETER X 45" LONG. 11" X 17" DISCHARGE. DRIVE IS UN...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRIVE IS 1/3 HP 1725 RPM, 230/460 VOLT. REDUCER IS MORSE SN 74I-8425; RATIO OF 15:1.

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. 17.25" X 11" DISCHARGE. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRIVE IS 1/3 HP 1725 RPM, 230/460 VOLT. REDUCER IS MORSE SN 74I-8425; RATI...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

CARBON STEEL CONSTRUCTION. 48" W X 46" LONG X 22" DEEP. TWO RIBBON TYPE SCREWS 20" DIAMETER X 45" LONG. 11" X 17" DISCHARGE. DRIVE IS UNMOUNTED, 3/4HP 1725 RPM, 208-220/440 VOLT. REDUCER IS MORSE SN 75M05009;...

PFAUDLER GLASS COATED AGITATOR SHAFT - 44"Ø SPAN

• Manufacturer: Pfaudler

ITEM #: 11674 PFAUDLER GLASS COATED AGITATOR SHAFT - 44"Ø SPAN 3.5"Ø SOLID CARBON STEEL SHAFT ENTIRELY GLASS COATED FROM DRIVE END. THE STEPPED-DOWN DRIVE CONNECTION IS 3.0"Ø X 2.25" LONG WITH A 0.75" KEYWAY. L...

PFAUDLER GLASS COATED AGITATOR SHAFT - 44"Ø SPAN

• Manufacturer: Pfaudler

3.5"Ø SOLID CARBON STEEL SHAFT ENTIRELY GLASS COATED FROM DRIVE END. THE STEPPED-DOWN DRIVE CONNECTION IS 3.0"Ø X 2.25" LONG WITH A 0.75" KEYWAY. LIKELY DESIGNED FOR A 48"Ø TANK OR LARGER. OVERALL LENGTH: 91"

15 Cu. Ft. Stainless Steel Hopper with 3/4HP Agitator

Dry storage conical hopper (12GA. rolled & formed stainless sheet) One-piece cover with bracing and hinged lid 36" diameter with 10" straight side and 11" flanged outlet Slope of the cone is approximately 60° 2"Ø...

STAINLESS STEEL LIQUID HOLDING TANK WITH AGITATOR - 70 GALLON CAPACITY

ITEM #: 12093 USED STAINLESS STEEL LIQUID HOLDING TANK WITH AGITATOR - 70 GALLON CAPACITY 24"Ø X 36" STRAIGHT SIDE LENGTH, HALF-MOON HINGED LID, CONE BOTTOM WITH 2"Ø SANITARY OUTLET. OVERALL HEIGHT OF TANK IS 51...

Industrial Air 475 Gallon Stainless Steel Tank w/ Agitator

• Manufacturer: Industrial Air Inc.

ITEM #: 18612 Used Industrial Air 475 Gallon Stainless Steel Tank w/ Agitator All stainless steel formed and welded flat-bottom mix tank (11GA stainless sheet)Ø48" X 66" straight sideFlat top with bridged support...

STAINLESS STEEL LIQUID HOLDING TANK WITH AGITATOR - 70 GALLON CAPACITY

24"Ø X 36" STRAIGHT SIDE LENGTH, HALF-MOON HINGED LID, CONE BOTTOM WITH 2"Ø SANITARY OUTLET. OVERALL HEIGHT OF TANK IS 51". INCLUDED VERTICAL TOP-MOUNTED MODEL X1Q25 LIGHTNIN AGITATOR.

Industrial Air 475 Gallon Stainless Steel Tank w/ Agitator

• Manufacturer: Industrial Air Inc.

All stainless steel formed and welded flat-bottom mix tank (11GA stainless sheet) Ø48" X 66" straight side Flat top with bridged support for a 1HP ProQuip agitator with 4-blade swept impeller 2"Ø bottom-side drai...