Used agitators in Hiroshima, Japan

SUS tank with agitator

250L φ710×H640(Body)×H750(Leg) Remarks: Ancillary product for 6931 Pressure Cake Mixer

［Satake] Agitator Model No

• Manufacturer: Satake

Shaft and blade material: SUS. Three propellers x 1. Rotation speed: 360 rpm. Base with casters/manual elevation type.

SUS tank

Total capacity: approx. 2000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.

SUS tank

Total capacity: approx. 1000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.

SUS tank

Total capacity: approx. 3000L. *Some accurate capacity requires actual size measurement due to lack of data. Equipped with an agitator (eG3).

SUS tank with coil

Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)

3000L Vertical cylindrical type

Agitating blade: Side scraping specification Power: 2.2kw | Material: SUS | Quantity saved: 7 units

Izumi Food Machinery Vertical Cylindrical Type

• Manufacturer: Izumi

Jacket and agitator included Shower ball included Power: 1.5kw | Material: Wetted part SUS | Quantity saved: One | Size: Diameter: Approximately 2300φ Overall height: Approximately 3600H

Shimazaki Works Cylindrical Vertical

• Manufacturer: Shimazaki Seisakusho

For medium viscosity (7000CP) 11kw cheaper 3-stage blades, filling volume: 1200L, Jacket: Yes Agitator: 11kw, low cost Shape: Bottom dish mirror Previous experience: Used in adhesive manufacturing process

3500L Cylindrical vertical type

Agitator: 5.5kw (Cyclo Decelerator) Jacket：SUS304 Drawing available

2002 Iwai Machinery Industry Cylindrical vertical type

• Manufacturer: Iwai Machinery Industry

Jacketed and agitated (0.4kW) Shower ball Bottomless Type 2 pressure vessel

1990 Iwai Machinery Industry Cylindrical vertical type

• Manufacturer: Iwai Machinery Industry

Type 2 pressure vessel Jacketed and agitated (0.4 kW) Shower ball Bottomless

1982 Hitachi Ltd. Cylindrical vertical type

• Manufacturer: Hitachi, Ltd.

Conveyor surface: 9.8 m2 Pressure: 6 kg/cm2 Jacket: Coil Agitator: 1.5kw Shape:Flat top and bottom

Hitachi, Ltd. Cylindrical vertical type

• Manufacturer: Hitachi, Ltd.

Wetted part material: SUS Flat top and bottom SUS spiral cored Jacket: Coil (transmission surface 5m2) Agitator: 1.5kw Shape: Upper and lower flat

10,000L (10m3) Cylindrical vertical type

Bottomless, with legs. Reduction ratio 1/29. Interior has been simply cleaned.