Used agitators

1 1/2″ Flange Bearing for 200-700 Gallon Tanks

• Manufacturer: Seal-Rite

1 1/2” Flange Bearing for 200-700 Gallon Tanks NOTE: Hydraulic parts are not returnable, so be sure you know what you need at the time of your order. Also, most parts are shipped unpainted. ***All Hydraulic Par...

2 7/16″ Flange Bearing for 850-2,000 Gallon Tanks

• Manufacturer: Seal-Rite

2 7/16” Flange Bearing for 850-2,000 gallon tanks NOTE: Hydraulic parts are not returnable, and most parts are shipped unpainted. ***All Hydraulic Parts are Non-Returnable*** Features: Size: 2-7/16 inches Desi...

2 7/16″ Flange Bearing for 4,000-10,000 Gallon Tanks

• Manufacturer: Seal-Rite

2 7/16” Flange Bearing for 4,000 to 10,000 gallon tanks Purchase the robust 2-7/16″ Flange Bearing, designed for 4000-10,000 gallon tanks, ensuring reliable support and smooth operation. NOTE: Hydraulic parts ar...

10000 liter tank, Aisi 304 with agitator flange

remarks: Slight differences in design, e.g. B. outlets; rectangular opening approx. 600 x 600 mm in the upper bottom; various small rust spots on the outside (see photos); 2 tanks with a dent in the cylinder; con...

3000 liter insulated tank, Aisi 304 with agitator flange

Volume: 3.000 liter | Stand type: legs height adjustable | Quantity legs: 6 Piece | Insulation: available | Insulating jacket: hermetically welded | Material insulation jacket: stainless steel | Diameter inside:...

1813 liter pressure vessel, Aisi 316 with agitator flange

• Manufacturer: Heinrich Nowak

max. allowable working temperature: 100 °C Volume: 1.813 liter | Vacuum: 1,0 bar | Max. excess pressure: 1,0 bar | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 1.195 mm | Cylindrical height: 1.260...

19000 liter storage tank, Aisi 316 with lateral agitator flange

• Manufacturer: Metkon AG

notice: some residues of previous content, manhole cover plated

100.000 liter storage tank, Aisi 304 with lateral agitator flange

• Manufacturer: Holvrieka

remarks: Sloping bottom with a slope towards the outlet (a concrete foundation would have to be built on site for installation); total height estimated according to drawing (smaller deviations possible); Cylinder...

318 liter heatable/coolable pressure vessel made of stainless steel 316 with agitator flange

• Manufacturer: Diessel

max. allowable working temperature: 143 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 143 °C Temperature control cylinder (dj): half-coil temperature control bottom...

R&B Clamp/Flange Air Stirrer 6.7 kW

Clamp On Stirrer, Variable Speed, 3,000 Rpm Unit with S/S Shaft with Propeller or Turbine Type Mixer Heads for mixing non viscous liquids. Angle adjustable, length to suit tank. Unit Flange or Clamp Mounted. A ra...

0.37 kw 1440 RPM S/D Flange Mounted Marine Stirrer

Stainless Steel Stirrer shaft 16 mm dia x 800 mm long with 100 mm Dia Marine Impeller with 0.37 kw 1440 rpm 1 phase drive motor.