Used Processing in Pennsylvania, USA

1952 BIRDSBORO FURNACE PUSHER

• Manufacturer: BIRDSBORO

Inventory id: 20073800000 | Feature 1: ALREADY DISMANTLED

2007 60 CFM HANKISON HHL 60 INDUSTRIAL AIR DRYER, USED AIR COMPRESSORS AND DRYERS, USED AIR COMPRESSORS AND DRYERS

• Manufacturer: SPX Hankison

Inventory id: 11336000000 | Capacity: 60 | Pressure: 100 | Type (rot screw/ reciprocating): DESSICANT | Length: 32 | Width: 32 | Height: 61 | Weight: 492 | Features1: NEW, NEVER USED | Features2: 1" NPT INLET / ...

16" (406 MM) BAR MILL ROLL FOR 1/2" REBAR

• Manufacturer: UNITED ENGINEERING

Inventory id: 10746300900 | Rolls: 2 | Size (dia): 16 | Size (face): 24 | Type (work, intermediate, backup): WORK | Material composition: CAST IRON | Overall length: 63 | Shaft diameter drive end: 6.87 | Shaft d...

40" (1016 MM) WIDE X 14" (356 MM) DIA. BIRDSBORO BILLET & BLOOM TABLE

• Manufacturer: BIRDSBORO

Inventory id: 11057300000 | Table width: 40 | Roll face: 40 | Roll diameter: 14 | Length: 115 | Roll spacing: 60 | Roll fabrication (solid, hollow): HOLLOW | Roll bearing type (roller, sleeve): ROLLER | Motor hp...

1982 36" (914 MM) WIDE X 18" (457 MM) DIA. ECOLAIRE TABLE

• Manufacturer: BAUER GEAR

Inventory id: 10765300600 | Table width: 36 | Roll face: 36 | Roll diameter: 18 | Length: 38.5 | Drive arrangement: INDIVIDUALLY DRIVEN | Number of rolls: 8 | Roll spacing: 66 | Roll fabrication (solid, hollow):...

1997 26' X 24" WIDE HYTROL MODEL TA BELT CONVEYOR

• Manufacturer: Hytrol
• Model: TA

Inventory id: 20065100000 | Table width: 24" | Roll face: 28" | Length: 26' | Drive arrangement: CENTER DRIVE | Number of rolls: N/A | Roll spacing: 28" BELT SUPPORT ROLLERS | Roll fabrication (solid, hollow): H...

13" (330 MM) WIDE X 12" (305 MM) DIA. POMINI SIX ROLL TABLE SECTION

• Manufacturer: POMINI

Inventory id: 10774900600 | Table width: 13 | Roll face: 13 | Roll diameter: 12 | Length: 13 | Drive arrangement: INDIVIDUALLY DRIVEN ROLLS | Number of rolls: 6 | Roll spacing: 28 | Roll fabrication (solid, holl...

1980 60" (1525 MM) WIDE WEAN/CCI CONTINUOUS HOT DIP GALV LINE

• Manufacturer: Wean

Inventory id: 20034000000 | Entry coil width max: 60 | Years when upgrades performed: 2011 | Description of upgrades: GALVANIZING SECTION BY CCI | Capacity: 250,000 | Material: GALVANIZED STEEL COILS | Type (no...

1993 90 FEET OF INDIVIDUALLY DRIVEN ROLLER TABLES FOR ANGLES, CHANNELS, FLATS (NCO)

• Manufacturer: Simac

Inventory id: 20081402900 | Roll face: 31.5 | Roll diameter: 10.5 | Length: 90 FEET

70 TON PER HOUR BILLET REHEAT FURNACE

Inventory id: 20090300400 | Capacity (tph): 70 TON PER HOUR | Manufacture: SMS / MEER

2012 BILLET RECEIVING TABLE

• Manufacturer: SMS / MEER

Inventory id: 20090300100 | Table width: 40 FT WIDE | Length: 40 FT LONG | Previous use: BILLETS ARE REMOVED FROM THE TABLE WITH A LIFTING ARM THAT LIFTS THE BILLET FROM THE TABLE AND SETS IT ON A FURNACE FEED R...

1993 80 FEET OF INDIVIDUALLY DRIVEN ROLL TABLES FOR 16 INCH DIAMETER BUNDLES

• Manufacturer: Simac

Inventory id: 20081800600 | Roll face: 17 3/4" | Roll diameter: 9 1/2" | Number of rolls: 20 | Motor hp: 3 HP | Motor rpm: 1760 | Motor voltage type (ac / dc): AC

2012 MUELLER AT40-F-20 HEAT EXCHANGER

• Manufacturer: Mueller

Inventory id: 20087800200 | Type or description: PLATE TYPE HEAT EXCHANGER | Previous use: WATER | Length: PACK LENGTH - 14.65" TO 13.76" | Weight: 2710 LBS

2017 EVOQUA MODEL 470G32-203MYLW "J-PRESS" FILTER PRESS

• Manufacturer: EVOQUA

Inventory id: 20088600000 | Type or description: FILTER PRESS | Capacity: 0.5-4 CUBIC FOOT DRY CAKE CAPACITY | Suction pressure: FEED PRESSURE - 225 PSI | Body material (steel, iron): COMPOSITE | Connections (sc...

Atlas-Copco OSC 95 Centrifugal Separator

• Manufacturer: Atlas-Copco
• Model: OSC 95

Good condition Atlas-Copco OSC 95 Centrifugal Separators manufactured in 2010. Located in Germany and other countries. Click request price for more information.