Used Press Brakes in Canada

2003 Used HACO ERMSE 40200 | Press Brakes

• Manufacturer: Haco - Atlantic
• Capacity: 220,000 kg

124” (3150mm) Between Side Frames DEPTH OF THROAT (gap) 11,8” (300mm) RAM STROKE 7,8” (200mm) DAYLIGHT OPENING 15,35” (390mm) CLOSED HEIGHT 7,48” (190mm) WORKING HEIGHT 38” (965mm) WIDTH OF THE TABLE 7,8” (200mm)...

2007 Used LVD PPEB 350/15 | Press Brakes

• Manufacturer: LVD - Strippit
• Model: PPEB 35015
• Capacity: 350,000 kg

LVD PPEB 350/15 new in 2007. Machine is operational and bending apart from a few features needing repairs (1 sheet follower and laser measurement system). Was time for an upgrade with minimal issues since purchas...

1998 Used BETENBENDER 12-190T | Press Brakes

• Manufacturer: Betenbender
• Model: 12-190T
• Capacity: 190,000 kg

Used betenbender 12-190T manually adjusted X axis with digital readout Footpedal control Depth stops and mircometer for depth setting purchased new machine no use for this one anymore.

2002 Used HACO ERMS 43225 ATS560 | Press Brakes

• Manufacturer: Haco - Atlantic
• Capacity: 225,000 kg

Y1 – Y2 Depth programming X axes position programming Retraction from the back gauge Program storage

Xpro Hydraulic Press Brake

Xpro Hydraulic Press Brake CNC Press brake with high precision measurement gauges on four axis of the machine, Y1, Y1, X and R axis all servo drive control with digital high accuracy measurement system can be bot...

Hydraulic Press Brake

Press Brake for Ballistic Steel The Hydraulic Press Brake is meticulously engineered to handle thick ballistic steel plates, ensuring precision and durability in every bend. After undergoing heat treatment, the m...

Hydraulic Press Brake with tools

Promotion: Hydraulic Press Brake with tools Buy hydraulic press brake today comes with 5000 USD worth of tooling Hydraulic Press brake provide high-quality bending in a wide variety of materials and different thi...

8′ x 60 tons Hydraulic Press Brake with NC Controller and Die | Press Brake

8′ x 60 tons Hydraulic Press Brake with NC Controller and Die | Press Brake Our NC press. brake features 20″ programmable motorized back gauge Welded aged, steel frame 2 Axis controller NC control motorized Angle...

250 TON WYSONG XCL250-144 12' PRESS BRAKE

• Manufacturer: Wysong
• Capacity: 250,000 kg

250 TON WYSONG XCL250-144 12' PRESS BRAKE Manufacturer: Wysong Model: XCL250-144 POWER: 575v, 60hz, 3ph Tonnage: 250 Ton Bed Length: 12'ft (144'') Between housings: 126" Ram Stroke: 10'' Adjustment: 9'' ...

2007 DURMA E37160 160 TON X 12' PRESS BRAKE

• Manufacturer: Durma - Durmazlar
• Capacity: 160,000 kg
• Stroke length: 200 mm

2007 DURMA E37160 160 TON X 12' PRESS BRAKE Manufacturer: Durmazlar Model: 7534072830-E Mfg Date: 2007 POWER: 575v, 60hz, 3ph Capacity: 160 Ton Bending Length: 3700 mm Table / Bed Height: 859 mm Hydraulic...

2004 HUANGSHI 44 TON PPT44-6 FAB MASTER PRESS BRAKE

• Manufacturer: HUANGSHI HUAXIN

2004 HUANGSHI 44 TON PPT44-6 FAB MASTER PRESS BRAKE Manufacturer: HUANGSHI HUAXIN Model: FAB MASTER PPT 44-6 Serial no. 4341 Mfg Date: 10/2004 Power: 575V 60Hz 3PH 3kW Full load current: 7A Circuit protect...

2019 MVD C400 14' X 400 TON PRESS BRAKE

• Manufacturer: MVD
• Stroke length: 305 mm
• Daylight: 533 mm

2019 MVD C400 14' X 400 TON PRESS BRAKE Manufacturer: MVD Model: C400-4300 Mfg date: 2019 POWER: 575v, 60hz, 3ph GENERAL Press Force: 400 tons Bending Length: 4,060 mm (160in) Bed Length (table length): 4...

VARIOUS LENGTH PRESS BRAKE DIES (X6)

VARIOUS LENGTH PRESS BRAKE DIES ( x6 DIES TOTAL ) x4 - 12' FOOT DIES x1 - 14' FOOT DIE x1 - 5' FOOT DIE

Masteel MBHS-10130

• Manufacturer: Masteel

SPECIFICATIONS maximum capacity 130 ton maximum bending length 10’ distance between side frames 98” bed height 34” bed below floor - throat depth 12-3/4” ram stroke 8” fast approach speed 275” per minute ...

Servo Electric Press Brake Price

Full servo electric press Brake available up-to 8 foot Ask for price now! Low Cost Servo Electric Press Brakes are no-hydraulic, flexible, reliable and advance bending machines. A next generation machine idea tha...