Used Notching Machines

Pre Notching Unit #0102817

MACHINE SPECIFICATIONS: Traveling Hydraulic Press for Pre-Notch OVERALL DIMENSIONS: 9′ 6″ x 4′ 6″ x 6′ APPROXIMATE WEIGHT: 2,000 Lbs.

Art Iron Air Notching Machine #0815219

Dual Station Capacities: Air Operated. Left station: 2" | Right station: 1-1/4"

Art Iron Air Notching Machine #0815319

Dual Station Capacities: Air Operated. Left station: 1-1/4" | Right station: (2) 1-1/4"

Art Iron Air Notching Machine #0815419

Dual Station Capacities: Air Operated. Left station: 1-1/4" | Right station: (2) 1-1/4"

Hydraulic Paper Corner Radius Notcher 3/8" Notch Sheet Cardboard 115V

• Manufacturer: Notch

Used, in Good Working Condition, Tested. Has a 3/8" radius notcher. 120v power for the hydraulic unit. Foot pedal to engage. Missing front panel. Hydraulic setup may not be original. If this item ships as Flat Ra...

(Inv.52041) Circle T Mfg. 31-P Mount A Glide Drawer Notcher

(Inv.52041) Circle T Mfg. 31-P Mount A Glide Drawer Notcher, Pneumatic Powered

Cantek JEN60 Drawer Notchers

• Manufacturer: Cantek
• Model: JEN60

Adding undermount hardware to your cabinet drawers just got easier. The Cantek JEN60 Drawer Notcher is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation o...

Cantek JEN60 Drawer Notchers

• Manufacturer: Cantek
• Model: JEN60

The Cantek JEN60 Drawer Notcher is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s de...

(Inv.54007) West Plains Notcher

Unit Was In Production Till October 2024 and There Are No Known Mechanical Issues,

Pillar FNX: Precision Floor Notching Machine for Cabinet Makers

Notch Cabinet Floors with Dual-Station Speed! The Pillar FNX notches cabinet floor corners with dual stations, cutting ¼” x 1” notches in seconds. Its safe, adjustable design and stackable capability make it a mu...

2008 HUNTER XL-2024 AUTOMATIC MOLDING MACHINE

• Manufacturer: Hunter

Hunter Model XL-2024 Deep Flask Automatic Molding Machine, with PLC Controls, Some Spares

2000 HUNTER HMP-10G AUTOMATIC MOLDING MACHINE

• Manufacturer: Hunter

Hunter HMP-10G Automatic Molding Machine, 14 X 19, with Hydraulic Pump and Control Panel, to be offered rebuilt

10" x 10" x 1/4" EUROMAC HAEGER "250/6S" HYDRAULIC CORNER NOTCHER w/AUTO HOLDDOWN - FOOT PEDAL

• Manufacturer: Euromac
• Model: 250/6S

10" x 10" x 1/4" EUROMAC/HAEGER "250/6S" HYDRAULIC CORNER NOTCHER Imperial Metric Serial No 23814, Model 250/6S, EQUIPPED WITH: Automatic Hold Down Foot Pedal CATALOG SPECIFICATIONS: Thickness Capacity, Maximum 1...