Used Machine Tools in Oregon, USA

Armstrong Bandsaw Sharpener, No. 2 Left Hand Automatic Bandsaw Sharpener

• Manufacturer: Armstrong

Model Armstrong No. 2 Left Hand Automatic Bandsaw Sharpener. For saws up to 8" wide. Complete with a set of post brackets, motors, starters, and one set of standard cams. Good condition. See photos of Later M...

Griggio Bandsaw, Griggio SNAC 940 Bandsaw, S/N M2999

• Manufacturer: Griggio

Griggio SNAC 940 Bandsaw, S/N M2999. 37" diameter (940mm) wheels operate at 550 RPM. 7.5HP/5.5KW. Maximum depth of cut is 22" (560mm). Maximum width of cut inside saw is 35-3/4" (910mm). Table size is 31-1/2...

New Crosscut Solutions Cut-Off Saw, Model CS14M Cut-Off Saw

One New Crosscut Solutions Model CS14M Cut-Off Saw (left hand). Mechanically operated, 2" x 8" capacity, 7 1/2 HP motor, TEFC 230/460 volt 3-phase, 60 cycles, magnetic starter with 110 volt control voltage, adju...

Armstrong Bandsaw Sharpener, No. 4 Left Hand Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong No. 4 Left Hand Bandsaw Sharpener, S/N 9304. No stands, cams, or filing clamp (but they are available at additional cost). See photos of Armstrong No. 4 Left Hand Bandsaw Sharpener on our web site. I...

Precision Cut-Off Saw, Left-Hand Model 23 Pneumatic Cut-Off Saw

Precision Left-Hand Model 23 Pneumatic Cut-Off Saw, Serial No. 280192A, new 7/83, 5 HP, 2x8 capacity, with blade. Missing air lubricator, foot switch and pushbutton. Needs repair. See photos of used Precision L...

Mid-Oregon Cut-Off Saw Left-Hand Mechanical

Mid-Oregon Left-Hand Mechanical Cut-Off Saw, Serial No 22875-1734L; new in 5/90. 7-1/2 HP motor 14" diameter blade 2x8 capacity with foot pedal control. Appears to be in good condition, missing side cover. See ph...

SEW Eurodrive helical-worm gear motor. Model: DRN80MK6.

• Manufacturer: SEW-Eurodrive

230/460 Volt, 3PH., 1150/26 RPM. Decommisioned.

Peterbilt 367, T880, T680 Charge Air Cooler # 606137

• Manufacturer: Peterbilt
• Model: 367
• Horsepower: 530 horsepower
• Gross weight: 36,300 kilogram

Peterbilt / Kenworth, 367, T880, T680, Charge Air Cooler (G-PB20E, N8985001, N4095001, N4095002, CV577001, W6924002, 321915A, 441313, 6970024, W6924001, LT7065BP, HDH010565BP, N4095001, F3160891102030, F316089123...

Glama GGM-100/450 Radiator # 890727

• Manufacturer: Glama
• Model: GGM

Glama, GGM-100/450, Radiator *ICEBOX Replacement part for OEM*@

Miller Big Blue, Welder Oil Cooler # 820247

• Manufacturer: Miller
• Model: Big Blue

Miller, Big Blue, Welder, Oil Cooler (271724, RS6264, 206558) *ICEBOX Replacement part for OEM*@

Miller Big Blue, Welder Oil Cooler # 820247

• Manufacturer: Miller
• Model: Big Blue

Miller, Big Blue, Welder, Oil Cooler (271724, RS6264, 206558) *ICEBOX Replacement part for OEM*@

2019 ALLMAND MP25-8E1

• Manufacturer: Allmand
• Model: MP25-8E1

Standby Power - kVA(kW)27.5 (22) Prime Power - kVA(kW)25 (20) Voltage Single Phase (Switchable)120 / 240 / 277 Voltage Three Phase (Switchable)208 / 240 / 416 / 480 Amperage Single Phase 120 V (A)60 x 2 Amperage ...

Marvel 8 Mark II Bandsaw with In & Out Feed Conveyors

• Manufacturer: Marvel
• Model: 8 Mark II

See photos for dimensions Weight: ~2800 lb | Saw type: Vertical Bandsaw with Tilt Frame | Serial: 826908 | Blade length: 14’ 6” | Blade width: 1” | Blade speed: 50-450 SFPM | Capacity: 18” x 22” | Height: 84 ½” |...

UPA Technology, Inc. Coating Thickness Standards & Certification Documents

5 plastic cases containing standard discs, floppies & documentation contained within one black case printed, "UPA TECHNOLOGY, INC., SYOSSET N.Y." Photos are numbered per plastic case See photos for elements & con...

Armstrong #4 Digi-Cam LH Bandsaw Sharpener

• Manufacturer: Armstrong

Sidewinder Feed Finger, StrongArm. All parts reconditioned or replaced with NEW.

Miller BIG 40 Welding equipment

• Manufacturer: Miller
• Model: BIG 40

Good condition Miller BIG 40 Welding equipment available between 1981 and 2004 years. Located in USA and other countries. Click request price for more information.