Used Machine Tools in United Kingdom

300mm Dia 4 Jaw Chuck

300mm Dia 4 Jaw Chuck 70 mm Bore Camlock Fitting (no pins)

630mm 4 – Jaw Chuck

630mm 4 – Jaw Chuck Camlock Fitting

630 mm Dia. 3 – Jaw Chuck

630 mm Dia. 3 – Jaw Chuck Plain Back Bore: 240 mm

Various BT40 Spindle Tool Holders

Various BT40 Spindle Tool Holders

SMW Autoblock Power Chuck

SMW Autoblock Power Chuck 3 Jaw x 315mm Diameter £1750.00

3 – Point Stationary Roller Steady (unused)

3 – Point Stationary Roller Steady (unused) 10 – 150 mm Capacity Suits a Colchester VS 2500

300 mm Dia. 4 – Jaw Chuck

300 mm Dia. 4 – Jaw Chuck Camlock Fitting Bore: 70 mm

Alberti TCU-3.5 Swivel Angle Milling Head, BT50 Spindle Taper

• Manufacturer: Alberti

Alberti TCU-3.5 Swivel Angle Milling Head, BT50 Spindle Taper, ER32 Collet Tool Holding. S/No. 08380041

300 mm Dia 4- Jaw Chuck

300 mm Dia 4- Jaw Chuck Plaine Back Bore: 70 mm

2003 Kitchen and Walker G50 x 1600

• Manufacturer: Walker

Kitchen and Walker G50 x 1600 Radial Arm Drill Radius of arm: 1600mm | Spindle taper: MT5 | Spindle speeds: 25 – 2000 RPM | Max. drilling capacity: 75mm iron / 50mm steel

6m x 0.96m Custom Built Workbench On (3) Bott 1.05m Seven Draw Tool Cabinets with Heuer 7in & Kenned

• Manufacturer: Heuer

6m x 0.96m Custom Built Workbench On (3) Bott 1.05m Seven Draw Tool Cabinets with Heuer 7in & Kennedy 8in Bench Vices, Electric Sockets And Contents Of Tools As Lotted

ABWOOD 6" MACHINE VICE

• Manufacturer: Abwood

ABWOOD 6" MACHINE VICE Jaws are 6" Wide x 2" Deep : Max. Opening 4 1/4".

1 Lot Assorted HSS Drills & Drill Sleeves

MGA Deep Hole Borer 250 x 10,000mm Capacity

• Manufacturer: Safan

MGA (Romanian) Deep Hole Boring Machine Machine had a complete retrofit in 2007 to enable CNC or manual mode operation Electric Drives Software Winstudio At the moment the machine is set to bore 3000mm length Has...