- Trusted Seller
DEMAG ERGOTECH EXTRA 80-430 injection moulding machine
- Manufacturer: Demag
- Model: Ergotech
was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and ...
- Trusted Seller
DEMAG ERGOTECH VIVA 800-400 injection moulding machine
- Manufacturer: Demag
- Model: Ergotech
was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colo...
- Trusted Seller
ENGEL ES 1350/350 HL injection moulding machine
- Manufacturer: Engel
- Model: ES 1350
was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameter...
- Trusted Seller
ENGEL INSERT 60H/30 SHUTTLE
- Manufacturer: Engel
- Model: Insert
was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics....
- Trusted Seller
FERROMATIK MILACRON K-TEC 450
- Manufacturer: K-Tec
was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining ...
- Trusted Seller
BATTENFELD BA 600 CDC
- Manufacturer: Battenfeld
- Model: BA 600 CDC
The was built in Austria in 2002. It is equipped with control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection...
- Trusted Seller
FERROMATIK MILACRON EUROPE ELEKTRA 155
- Manufacturer: Milacron
manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrica...
- Trusted Seller
VICTOR MSZ 30
- Manufacturer: Victor
was produced in 2015. The machine is used to produce bottles with a maximum height of ≤190mm and a maximum diameter of ≤100mm. It has a screw with a diameter of 40 mm, running at a speed of 10 to 225 revolutions ...
- Trusted Seller
TECHNO ZK
- Manufacturer: TECHNO
The was manufactured in Poland by the TECHNO-Wrocław company. The welding machine has arms with dimensions (L x W) 700 x 700 mm and a 3 x 0.3 mm cantalum tape. The welding time can be adjusted in the range of 0-6...
$978 USDJelenia Góra, Poland - Trusted Seller
GUANGZHOU PC2660S
- Manufacturer: GUANGZHOU
was manufactured by Chinese granulator manufacturer Guangzhou 3E Machinery Co. in 2018. The structure of the cascade knife granulator is made of high quality steel, ensuring rigidity, high efficiency and long ser...
- Trusted Seller
PONAR ŻYWIEC UT 090 H
- Manufacturer: PONAR ŻYWIEC
was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the in...
- Trusted Seller
ENGEL INSERT 200H/50
- Manufacturer: Engel
- Model: Insert
was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Than...
- Trusted Seller
BATTENFELD TM 1300
- Manufacturer: Battenfeld
was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...
$4,133 USDJelenia Góra, Poland - Trusted Seller
TECHNO ZK
- Manufacturer: TECHNO
, built in Poland by TECHNO-Wrocław, is used for economical packaging of products in a very short time. We have two units of such machines for sale, the price shown in the advertisement is for one unit.
$511 USDJelenia Góra, Poland - Trusted Seller
ZERMA GSE 700
- Manufacturer: Zerma
manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rot...
Tip: Enter manufacturer, model or keyword