Used Mineral Processing

24 x 9 ft (7.3 x 2.7 m) Boliden Allis SAG Mill with 3,000 HP

24 x 9 ft (7.3 x 2.7 m) Boliden Allis reconditioned SAG Mill with 3,000 HP (2240 kW) GE motor - Mill shell in 1 section - Inching drive, 3 piece - Feed and discharge ends - Shell and discharge liners - Discharge ...

Equivalent in Performance with Type AH Horizontal Slurry Pumps

- Centrifugal seal - Cast casings and pedestal base - Equivalent to series AH pump - Liners are pressure molded vulcanized rubber - Impellers are rubber, polyurethane and steel are available - Fabricated over-sea...

Type B-6-6 Ash Pump with 100 HP (74 kW) motor

Type B-6-6 Ash Pumps with 100 HP (74 kW) motor - Three units available.

16.5 x 340 ft Svedala Rotary Kiln

• Manufacturer: Svedala

- 16.5 ft diameter rotary kiln - 340 ft total shell length - 4 cast steel tires - 4 sets of rollers, 72x30 inch - Steel support frame - 3 access doors and 2 observation doors - Flanged exhaust outlet - Multi piec...

4,500 HP (3,355 kW) Louis Allis Motor; 1,785 RPM

• Manufacturer: Louis Allis

LOUIS ALLIS Armor Line 4,500 HP (3,355 kW) Motor: - 1785 RPM - 3 Ph - 60 Hz - 7411Z Frame - Type WPIIX - 4000 Volts - 556 Amps - Code E insulation - S.F. 1.0 - Continuous duty.

18 x 30 ft (5.5 x 9.1 m) Outotec SAG Mill with 6300 HP (4697 kW) motor

• Manufacturer: Larox

18 x 30 ft ( 5.5 x 9.15 m) Outotec SAG Mill with 6032 HP (4500 kW) motor: - Unused surplus. - Made in 2013. - Includes: Lube system, feed chute, trommel, instrumentation, inching drive, and mill liners. Enclosure...

New steel High-Chrome White Iron grinding mill liners

- New "Steel" high-chrome white iron grinding mill liners - For rod and ball mills - Shell and head liners available - Custom manufacture in North America - Liner Drawing required for quote - 4-6 month build time

Weir Model 6X500CVX10 Cyclone Cluster

• Manufacturer: Weir

- Two cyclone clusters with manifold distributors - Weir brand model 6X500CVX10 - 10 per bank - 2 banks available - Used for ball mill discharge classification - Removal and loading additional

Krebs 6-Cyclone Manifold/Distributor

- Krebs 6 cyclone manifold - Internal rubber lining - Spare cyclones, apexes, and vortexes available separately - Immediately available from storage

10 x 10 in Linatex Slurry Pumps

• Manufacturer: Linatex

10x10 Linatex Slurry Pumps - Rebuilt ball mill feed pumps, rubber lined, 36" 4-belt pump sheaves

12 x 5 ft Outotec Unused Surplus SAG Mill with 350 HP

• Manufacturer: Larox

- Unused surplus Meso Outotec SAG mill - Still in factory packaging - Delivered, never installed or used - 12.1 ft diameter (3.7 m) - 5 ft length (1.5 m) - Trunnion supported mill with ring and pinion gearset - 3...

20 x 10 ft (6.1 x 3.05 m) ANI FLSmidth SAG Mill with 2,500 HP

• Manufacturer: FLSmidth

- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter) - Manufactured by ANI/FLS - Includes WEG 2,500 HP motor - Enclosed gear drive made by David Brown - Inching drive - Mill is currently operational and installed -...

21 x 11 ft Hardinge SAG mill with 2,875 HP

• Manufacturer: Hardinge

21 x 11 ft Hardinge SAG mill with 2,875 HP - Mill is currently removed and in storage - Without liners or bolt package - Nuttall gear reducer - McLellan liner handler available separately - Spare motor available...

22 x 7 ft (6.7 x 2.1 m) Hardinge SAG Mills

• Manufacturer: Hardinge

22 ft x 7 ft (7 x 2 m) Hardinge SAG Mills - Motor Quoted separately - Previously ran on two 800 HP motors - Dual Flender gearboxes - Shell reconditioned

32 x 12 ft (9.8 x 3.6 m) Hardinge Koppers ( Metso) SAG Mill 6800 HP

• Manufacturer: Hardinge

32 x 12 ft (9.8 x 3.7 m) Hardinge Koppers SAG Mill 6800 HP (5100 kW) Two GE wound rotor induction motors: - 3400 HP - 710 RPM - 4000 V - Includes motor starter. - Includes lube system and temperature sensors. - F...