- Trusted Seller
Karlsbad, Germany 
Sheet metal benders
- Manufacturer: Zako Skotnice
Length: 3 – 8m | Strength: 1mm/2mm/3mm | Depth(width): 1m or 1.25m | Bend angle: 145° / 165° | Bending beam: Geometry according to customer requirements | Delivery time: about 4 months or depending on the a...
Steißlingen, Germany- Trusted Seller
2004 RAS FLEXIbend 73.40
- Manufacturer: RAS
- Model: FLEXIbend 73.40
Swivel bending, CNC, J-stop - 5 axes simultaneous RAS CNC control system 6000 for CNC control of upper beam, folding beam, backgauge, folding beam adjustment and lower beam adjustment. Simple input of all necessa...
Metzingen, Germany - Trusted Seller
2012 SCHECHTL KS 200
- Manufacturer: Schechtl
- Model: KS 200
Swivel bend. Manual, simple Sheet thickness (mm): 1 | Sheet width (mm): 2000 | Work area: 2.000 x 1 mm
Metzingen, Germany - Trusted Seller
1980 REIS TUS 60
- Manufacturer: Reis
- Model: TUS-60
Spotting press with extendable table and swing out top plate
Metzingen, Germany - Trusted Seller
1970 REIS TUS 60 OK
- Manufacturer: Reis
- Model: TUS-60
Hydraulic spotting press with swing out device Pressure capacity (to): 40 | Table length (mm): 670 | Table width (mm): 570
Metzingen, Germany - Trusted Seller
1983 hydraulic Die-Spotting Press Reis TUS 125 OK-50
- Manufacturer: Reis
- Model: TUS-125
pressure 50to, whell away & tiltable table hydraulic ejector, upper plate moveable
Heilbronn, Germany 
Unrolling and splitting systems
- Manufacturer: Zako Skotnice
Can be ordered in different sizes and configurations, as well as with automated coil storage!
Steißlingen, Germany
1984 EDEL Stanzprofi 400 #1052-01021
- Manufacturer: Edel
- Model: STANZPROFI 400
Accessories tool cabinet with various punches and dies
Bühl, Germany
1994 CAMU SC 615 M
- Manufacturer: CAMU
with drive Manual central spreading Brake motor Motor has only one on/off switch The reel runs
Sinsheim, Germany
2025 ARKU RM 1825
- Manufacturer: Arku
- Model: RM 1825
Part leveler and strip leveler - Maximum vertical roller spacing: 8 mm - Circulating oil lubrication of the drive shafts and leveling roller bearings - Infeed/outfeed table - Speed ??control via handwheel - Strip...
Sinsheim, Germany
1985 REIS TUS 115 OK 100
- Manufacturer: Reis
- Model: TUS-115
Press force: 100 t | Stroke: 1035 mm | Distance between columns: 1250 mm | Side window: 700 mm | Daylight table - ram (stroke up): 1035 mm | Surface of table: 1280 x 890 mm | Table height above floor: 630 mm | S...
Eislingen, Germany
1985 REIS TUS 125 OK 200
- Manufacturer: Reis
- Model: TUS-125
Press force: 200 t | Stroke: 1150 mm | Distance between columns: 1250 mm | Side window: 705 mm | Daylight table - ram (stroke up): 1475 mm | Surface of table: 1500 x 1200 mm | Table height above floor: 638 mm | ...
Eislingen, Germany
1979 REIS TUS 60 OK-40
- Manufacturer: Reis
- Model: TUS-60
Press force: 40 t | Stroke: 975 mm | Distance between columns: 620 mm | Side window: 470 mm | Daylight table - ram (stroke up): 940 mm | Surface of table: 1000 x 590 mm | Table height above floor: 770 mm | Surfa...
Eislingen, Germany
1991 REIS TUS 90 OK 40
- Manufacturer: Reis
- Model: TUS-90
Press force: 40 t | Stroke: 1100 mm | Distance between columns: 930 mm | Side window: 700 mm | Daylight table - ram (stroke up): 1035 mm | Surface of table: 1280 x 900 mm | Table height above floor: 665 mm | Sur...
Eislingen, Germany
Tip: Enter manufacturer, model or keyword