Used Machine Tools in Bavaria, Germany

1995 Dräco K9 double standing seam machine
- Manufacturer: Dräco
Used Dräco K9 double standing seam machine for closing angle and double folds, includes 1 set of cutting rollers for fold removal, including folding rollers. The machine is currently converted to cutting operati...
Hohenbrunn, Germany
Fasti 125-10/1.5 round bending machine
- Manufacturer: Fasti
Used Fasti rotary table saw, motorized, foot-operated, manual rear angle feed, emergency stop cord, very good condition The machine will be professionally repaired, inspected, and cleaned, and will then be full...
Hohenbrunn, Germany
1998 round bending machine Schwartmanns WSRV 03.2
- Manufacturer: Schwartmanns
used Schwartmanns 3-roll round bending machine, with wire forming grooves, folding groove and swiveling upper glove, rear roller adjustable via the rack, machine repaired by a specialist, tested, cleaned and then...
Hohenbrunn, Germany
1992 Ozamech KM 3000-2.5 swivel bending machine
- Manufacturer: Ozamech
Used Ozamech folding machine, easy program angle setting on the side stand, with foot switch, removable extension rail, upper jaw rail approx. 30 degrees Machine is unrepaired, in its current condition
Hohenbrunn, Germany
2009 ERMAK HGS-A guillotine shears
- Manufacturer: Ermak
- Model: HGS-A
- Maximum thickness: 6 millimeter
- Power requirement: 11 kilowatt
Used Ermak hydraulic guillotine shear, folding backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, and 14 hold-downs. The machine will be professionally repaired, inspected, and cleane...
Hohenbrunn, Germany
2010 Thalmann TD 200-6.4 double press brake
- Manufacturer: Thalmann
- Stroke length: 200 millimeter
Used Thalmann double bending machine, 5 finger grippers, Safety device: light barrier, Machine is sold as is, without warranty or functional test.
Hohenbrunn, Germany
1991 Jorns SuperLine-300-SO-CNC-6 long bending machine
- Manufacturer: Jorns
Well-maintained and robust hydraulic bending machine with foot pedal, retractable sheet supports, hydraulic radius adjustment, and automatic sheet thickness adjustment programmable via CNC control, with detachabl...
Hohenbrunn, Germany
2006 Long bending machine Biegemaster BS 4.2.0
- Manufacturer: Biegemaster
- Power requirement: 5.5 kilowatt
Used hydraulic bending machine with CNC touchscreen graphic control, Hydraulic material thickness adjustment, manual upper jaw preload, Motorized depth stop + conical stop, motorized roller shear. The machine w...
Hohenbrunn, Germany
2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kilowatt
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany
2011 Jorns TwinMatic-300-SO-1150-CNC8000 double folding machine
- Manufacturer: Jorns
Used Jorns TwinMatic-300-SO-1150-CNC8000 double press brake. The machine is a robust welded construction with 9 columns, 9 clamping cylinders, and 36 K38 coupling joints mounted on a base frame. The machine is ...
Hohenbrunn, Germany
2000 long bending machine Jorns ML200-SO-CNC400A-4
- Manufacturer: Jorns
Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...
Hohenbrunn, Germany
2019 press brake Adira PM 022040
- Manufacturer: Adira
- Power requirement: 15 kilowatt
Like-new Adira press brake with CNC-controlled crowning, LazerSafe safety system, foot pedal, and standard tool set. The machine is in like-new condition, having only a few operating hours. It was never used bey...
Hohenbrunn, Germany
2003 Long bending machine Jorns NL125-SM-OP 2100/2-4
- Manufacturer: Jorns
Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...
Hohenbrunn, Germany
1991 Press brake EHT EHPS 150-3050
- Manufacturer: EHT
- Power requirement: 18.5 kilowatt
EHT hydraulic press brake, type EHPS 150-3050, with controlled axes: Y1, Y2, X, Z1, Z2, R, pneumatic die adjustment, motorized crowning, Accessories: 2 support arms, Tooling: Pointed punches with interchangea...
Hohenbrunn, Germany
1992 Long bending machine Jorns NL125-SM-OP 6x1.25
- Manufacturer: Jorns
Used Jorns hydraulic press brake, foot switch, retractable sheet metal supports, emergency stop rail, motorized shear, water seal in the upper jaw, 9-channel control, control on the swivel arm, The machine wil...
Hohenbrunn, Germany