Used Processing in Saxony, Germany

TOKYO MASUDA return line filter

• Manufacturer: TOKYO MASUDA MANUFACTURING CO., LTD.

Return line filter, for direct tank mounting, with maintenance indicator TOKYO MASUDA MANUFACTURING CO., LTD. FRs06-20P06T-LX Return Line Filter New !

ELEKTROR radial fan

• Manufacturer: Elektror

Radial fans, radial blowers, radial high-pressure fans with belt drive ELEKTROR Karl W. Müller V-belt pulley ( fan ): Diameter: Ø 80 mm, 2 grooves, groove width: 10 mm Motor : ATB, FLENDER, LOHER Type: A 112M/4/2...

MANN + HUMMEL air filter

• Manufacturer: Mann+Hummel

Air filter MANN + HUMMEL, KAESER 45 650 92 172 used, tested !

VEM axial fan

• Manufacturer: VEM

Axial fan, axial blower, axial ventilator VEM, ILKA VAO 250 / 401 TGL27476 Motor: DM102/4-AV6/514 0.025 kW 1380 rpm 220 / 380 V New !

SONDERMANN PUMPEN Filter housing upper section

Filter housing upper part SONDERMANN PUMPEN + FILTER GmbH & Co. KG FISF.00.0000.146 12x threaded hole: M8 x 1.25, depth: 15 mm Thread: 2¼" ( inch ), length: 20 mm New !

WOODS tube fan

• Manufacturer: Woods

Axial fan, axial tube fan, with protective grille WOODS 56JM/20/2/3/14-24 3 S F2225 2910 rpm 380 / 420 V 3AC 50 Hz IP55 used, tested !

SEMO-TEC filter mats

Filter mats, single layer SEMO-TEC V600G F5 New ! Material width: 1450 mm | Material thickness: 25 mm | Roll length: approx. 20 m | Material: Polyester | Dimensions ( packaging ): 1570 x 340 x 340 mm

ORSTA Micro-S filter insert

• Manufacturer: Orsta

Micro-S filter insert ORSTA, FILTER TECHNOLOGY GERA MS200 Thread diameter: Ø 89 mm, Pitch: 2.0, Length: 15 mm New !

PAGUS sieve mesh with holder

• Manufacturer: Pagus

Screen mesh with holder PAGUS G14/5 1x U-profile for hanging 1x flat profile with three welded-on screws for tensioning Screw size: M10 x 1.5, length: 60 mm Material: Stainless steel ( 1.4301 ) New !

PAGUS sieve mesh with holder

• Manufacturer: Pagus

Screen mesh with holder PAGUS SR20/6 1x U-profile for hanging 1x flat profile with three welded-on screws for tensioning Screw size: M10 x 1.5, length: 100 mm Material: Stainless steel ( 1.4301 ) New !

ELEKTRIM radial fan

Centrifugal fan, radial blower, radial ventilator ELEKTRIM Motor : SKF71-28 0,55 kW 2810 rpm 220 / 380 V 3AC 50 Hz IP44 used, tested !

ECOCOLD cooling unit

Cooling unit, heat exchanger, cooler, chiller ECOCOLD AWP 10 Pump: KSB Multi Eco 35 D 0.8 kW 220 - 240 / 380 - 415 V 3AC 50 Hz Fan: ZIEHL-ABBEGG 104838 0.015 kW 870 rpm 230 V 1AC 50 Hz used, tested !

VEM axial fan

• Manufacturer: VEM

Axial fan, axial blower, axial ventilator VEM, MACHINE FACTORY NEMA LANW 355 TGL27476 Motor: ALM 102/4-A1 ( ALM102/4-A1 ) 0,06 kW 1400 rpm 220 / 380 V 3AC 50 Hz used, tested !

ZIEHL-ABEGG axial fan

• Manufacturer: Ziehl-Abegg

Axial fan, axial blower, axial ventilator ZIEHL-ABEGG FB035-4DK.2C.6S 1280 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz IP54 60 Hz - operation possible used, tested !

ILKA ceiling air heater

Ceiling air heater, heat exchanger, with fan ILKA, MASCHINENFABRIK Nema Type P20 TGL 180-1100 Fan: Impeller: Ø 240 mm Motor: VEM KMO 56 G 6 0.12 kW 870 rpm 220 / 380 V 3AC 50 Hz IP44 galvanized New, with document...