Processing » Hiroshima

Building Filters

610

Used Processing in Hiroshima, Japan

Tanabe Wiltech Z2L-3LV
- Manufacturer: Tanabe Wiltech
5000rpm/4400G Nominal capacity: 3-5 m3/h New motor will be installed at the time of servicing
Hiroshima, Japan
2003 Okawara Kakoki L-8
- Manufacturer: Okawara Kako Kikai Kikai
Moisture evaporation capacity: 3kg/h Hot air inlet temperature: 250°C, exhaust air outlet temperature: 100°C Disk atomization, parallel flow method Atomizer model: OCA-008B Collection method: Single point collect...
Hiroshima, Japan
1992 [Oe Kogyo] Cooker conditioner
- Manufacturer: Oe Industry
Paddle type Internal volume: 1.1㎥ Design pressure: 0.2kg / cm2 Design temperature: 200 ℃ With supply conveyor (3.7kw)
Hiroshima, Japan
2011 Izumi Environmental Engineering Vertical
- Manufacturer: Izumi
Tube: 25.4φ (2t) x 3000L x 165 tubes (SUS304) Body plate: 500φ (SGP-E)
Hiroshima, Japan
1986 Tanabe Wiltech Z32-SL-V-HP
- Manufacturer: Tanabe Wiltech
5000rpm/4400G Nominal capacity: 3-5m3/h Variable impeller type Pole change motor
Hiroshima, Japan
Tanabe Wiltec TOP-48-80
- Manufacturer: Tanabe Wiltech
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 800G Scraping device air-driven With control panel (without regenerative resistor)
Hiroshima, Japan
[TANABE WILTECH] Basket type centrifuge 55inch
- Manufacturer: Tanabe Wiltech
Fully automatic bottom discharge type. Hydraulic drive for scraper. Low speed motor 2.2Kw 200V. No nameplate.
Hiroshima, Japan
2002 Morimatsu Industrial Square Type
- Manufacturer: Morimatsu Industry
Panel tank with coin filling machine Tank 1000 × 2500 × 2000H + coin filling machine Total length 4000
Hiroshima, Japan
2009 Nippori Engineering DD-40NX6-0
- Manufacturer: Nippon Polymer Engineering Co.
Treatment air volume 25m3/min
Hiroshima, Japan
1989 Tanabe Wiltech Z32SL-3LV
- Manufacturer: Tanabe Wiltech
Three-layer decanter 5000rpm/4400G Nominal capacity: 3-5m3/h Variable impeller type Pole change motor
Hiroshima, Japan
Tomoe Engineering P-3000
- Manufacturer: Tomoe kogyo
No spare ball gearbox for decanter Material: SUS | Quantity saved: Two
Hiroshima, Japan
1984 Westfalia SA45
- Manufacturer: GEA
- Model: SA
30kw (motor not pictured but available separately). 4950rpm
Hiroshima, Japan
2002 Tamagawa Machinery TC-3.5S
- Manufacturer: Tamagawa Machinery
Internal volume: 4.6 m3 Heat transfer area: 62.6 m² Design temperature: 165 ° C Rotation speed: 1.36 to 5.33 rpm Type 2 pressure vessel
Hiroshima, Japan
Suiko PP tank
- Manufacturer: Suiko
MC-3000 Enclosed round tank Drawings available Material: PE | Quantity saved: One | Size: External dimensions: φ1625 x 2080H
Hiroshima, Japan
1996 Iwai Machine GHX
- Manufacturer: Iwai Machinery
Plate material: SUS316 Heat transfer area: 85.8m2 Flow rate: 100m3/h(MAX) Heat resistance: 150°C Number of Plates：CH①62 CH②42 CH③30
Hiroshima, Japan