Used Presses in Germany

1991 LEINHAAS AR11-160 RH 1

• Manufacturer: LEINHAAS

Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Mac...

2016 Mabu 15TFK

• Manufacturer: Mabu

Mabu 15TFK mPC40 (2016) Nominal Capacity: 120–150 kN (≈12–15 tons) Stroke Range: Fixed stroke, adjustable 20–40 mm Stroke Rate: Up to 600 strokes/min Construction: Rigid C-frame hollow cast design to minimize ...

1981 FRITZ MUELLER CR 40.1.11 1113-2100093

• Manufacturer: Mueller

Control type: conventional | Freight basis: FCA | Pressure: 40 t | Discharge: mm | Hub: mm | Total power requirement: kW | Machine weight approx.: t | Space requirement approx.: m

1992 STIERLI 300 HE/D/GS

• Manufacturer: Stierli-Bieger

Working force: 300 kN/30 t Tool height: 200 mm Stroke length: 0 - 300 mm Bending performance with prism tool MW 125/240: 200 x 16/200 x 24 mm Bending speed: 0 - 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: ...

Column frame

Additional information Used column frame with 2 guide columns Further information Weight: with threaded hole for M 24 x 1.5 mounting pin

2008 MAE M-AH 6 1113-235144

• Manufacturer: MAE
• Power requirement: 3.5 kW

Can only be directed between tips Control type: CNC | Freight basis: EXW | Pressure: 6 t | Hub: 1020 mm | Total power requirement: 3,5 kW | Machine weight approx.: t | Space requirement approx.: m

1996 DUNKES HZ 6,3 1113-24017

• Manufacturer: Dunkes
• Model: HZ 63

C-Type 1 Station Control type: conventional | Freight basis: FCA | Pressure: 6,3 t | Discharge: 170/180 mm | Hub: 310 mm | Drive power: 3 kW | Installation height: 775 mm | Machine weight approx.: 1,5 t | Worktab...

1982 DUNKES HZT 2,5 1113-23050

• Manufacturer: Dunkes
• Model: HZT 25

Control type: conventional | Freight basis: FCA | Pressure: 2,5 t | Discharge: mm | Hub: mm | Total power requirement: kW | Machine weight approx.: t | Space requirement approx.: m

2001 Staufermatic Type 112

• Manufacturer: Staufermatic

Serial No.: M-1971 Control Siemens Simatic OP17

1986 KAISER KP 35

• Manufacturer: Kaiser
• Model: KP 35
• Shut height: 250 mm

Before delivery Press gets a new PLC. Press capacity: 35 ton | Ram stroke adjustable: 6 - 50 mm | Slide adjustment: 50 mm | Shut height (stroke down, adjustment up): 250 mm | Free frontal opening l-r: 430 mm | Ta...

BRUDERER BSTA 50 HL

• Manufacturer: Bruderer
• Model: BSTA 50 HL
• Shut height: 300 mm

Press is already dismantled Press capacity: 50 ton | Ram stroke adjustable: 16 - 51 mm | Slide adjustment: 78 mm | Shut height (stroke down, adjustment up): 300 mm | Table surface area: 930 x 590 mm | Number of s...

1980 KAISER V 50 W

• Manufacturer: Kaiser
• Model: V 50 W
• Stroke length: 54 mm
• Shut height: 303 mm

IMCO Press force measurement Grip Feeder, Type ZR18ZT1 Max. Sheet width 180 mm Feeding length 150 mm Press has been overhauled in 2003 through Kaiser Co.

2008 Mabu VP250/ZR11

• Manufacturer: Mabu

Mabu VP250/ZR11 mPC10 (2008) Nominal Capacity: 250 kN (≈25 tons) Stroke Range: 7–62 mm, infinitely variable Stroke Rate: 80–500 strokes/min (programmable speed control via frequency-controlled main drive) Cons...

1997 RASTER ZEULENRODA HR 315 / 1600 - NL / RK

• Manufacturer: Raster
• Shut height: 370 mm

The press was converted to CE standard in 2015. The press was converted to a SIEMENS S7 control system. The conveyor system still has a SIEMENS S5 control system. Die lifters in the table Feeding unit KEMMERICH c...

1986 KAISER V 63 W / 860

• Manufacturer: Kaiser
• Model: V 63 W 860
• Shut height: 300 mm

Die lifters with balls for die change IMCO Press force measurement Grip Feeder, Type ZR 250 Max. Sheet width 250 mm Feeding length 210 mm