Used Machine Tools in Saxony, Germany

WMW AW 1020x810

• Manufacturer: WMW

Drill cube material made of cast steel. Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

METAKON drilling machine

• Manufacturer: METAKON

Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video:

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 45 pieces IND-SPHINX® PRECISION LIMITED D5463 D5463008000850000 Ã0.80x8.50mm Other quantities on request! New!

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

FIXATOR leveling range

• Manufacturer: Pagus

Bench leveling range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with 24 mm slot 1 piece Ø 100 mm x 4 mm, with 24 mm slot 1 piece Ø 100 mm x 5 mm, with 24 mm slo...

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, checked ! with operating instructions !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, tested ! with operating instructions !

Emag VCL 630/800

• Manufacturer: Emag

VERTICAL MULTIFUNCTIONAL HEADSTOCK UNIT FOR VLC 800 MT TURNING MILLING (see last photo for comparison) The headstock unit of the EMAG machines of the VLC series is characterised by short strokes, high rapid trave...

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 18 pieces TARGET PRECISION Series 150 Other quantities on request! New!

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 36 pieces TARGET PRECISION Series 150 Other quantities on request! New!

HAM PRECISION micro drill

• Manufacturer: HAM PRECISION

Micro drill, head drill, drill, 15 pieces HAM PRECISION Ã 6.20 x 10.5 mm Other quantities on request! New!