Used Machine Tools in Germany

W798 Machine tools

Diamond profile dressing roll NORTON 104392266 X600191 2117 Bolt circle diameter: Ø 75 mm, 8x bore: Ø 6.5 / 10 mm New !

2009 Spring drum from Conductix Wampfler – BEF 325524-0404-2DI (T)H/L Ø 550 mm 36598

• Manufacturer: Conductix Wampfler

Spring balancer, cable pull-out, reel, spring cable drum, spring cable drum, spring drum

Hydraulic vice rotatable from – clamping width 225 mm 23341

Hydraulic vice, machine vice, hydraulic vice, drilling machine vice

Reamer holder from PGH Metall – 50 60 19 Ø 20 mm Ø 35 mm 33668

• Manufacturer: PGH Metall

Slip-on holder, reamer, tool holder, machine reamer, reaming tool, fitting knife cutting set, milling holder, milling tool, boring head, spindle tool, reducing bushes, slip-on holder

Milling holders 9 pieces from Kelch - SK40 16855

• Manufacturer: Kelch

Tool holder, milling holder, milling tool 9 pieces of recordings: SK40 | 5x diameter: 32 x 38 mm | 4x diameter: 40 x 40 mm | Sale: only complete | Mass: 15,4 | Internal storage: 2A30403

Milling chuck SK50 from – test mandrel Ø 50 mm R=25.000 / L=120.068 36483

Tool holder, milling holder, milling tool, test mandrel

Milling chuck SK40 from – test mandrel Ø 39.99 mm R=19.995 / L=219.014 mm 36484

Tool holder, milling holder, milling tool, test mandrel

Mono tool holder by Komet - ABS tool holder 10224

• Manufacturer: Komet

turning tool holder, steel holder, turning tool, turning tool holder, tool holder -partially with internal water cooling

Milling chuck SK40 2 pieces from – Shaft: Ø 27/32 mm 35977

Tool holder, milling holder, milling tool, long milling arbor, clip-on holder

Milling chuck SK40 2 pieces of – 40 x 27 x 315 mm / 40 x 27 x 400 mm 34499

Tool holder, milling holder, milling tool, long milling arbor, clip-on holder

Milling chuck SK40 from – 40 x 40 x 400 34501

Tool holder, milling holder, milling tool, long milling arbor, clip-on holder

Milling adapter from – Ø 59 x 73 mm / Ø 40 x 85 mm 34334

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter

Milling chuck SK50 from – Ø 50 mm 34214

Tool holder, milling holder, milling tool, long milling arbor, clip-on holder

Milling chuck SK50 2 pieces of – 50 x 27 x 630 mm 34441

Tool holder, milling holder, milling tool, long milling arbor, clip-on holder

Rubber sealing profile 3 pieces of – 50 x 55 mm 27116

Rubber sealing profile, sealing plate, curing tool, seal, edge protection, solid rubber rectangular profile