Used Evaporators

Stainless Steel 316 Rising/Falling Film Evaporator - IPP# 220739

• Manufacturer: Buflovak/Blaw Knox

tubular evaporation system manufactured by Buflovak-Blaw-Knox. Includes 5 main pieces and support equipment such as pumps and small plate heat exchanger. Main pieces are as follows:(D) 1st effect steam chest (hea...

Rising/Falling Film Evaporator Stainless Steel 316 - IPP# 222987

• Manufacturer: Apparatebau Crimmitschau GmbH/Germany

single effect circulation evaporator carbon steel shell CE 0036 stamped shell side rated 10 bar@ 200°C, (volume 92 liter) single pass design bolt flat boned head welded dished bottom with stand (1.4408) stainless...

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 211618

• Manufacturer: Buss-SMS-Canzler GmbH

wiped thin film evaporator with external condensor and seperator tank rated 440 liter With top mounted 3.7 KW, 50 Hz gear motor, mechanical seal on rotor, (4) blade rotor with wipers With 2 SqM external 1.4435 SS...

Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220585

• Manufacturer: Pitton-Gessner/Germany

1.4571/H2 falling film rated -1/3 @ 200 ° C bar, 640 l tubes, -1/9bar@ 250 ° C, 610 l shell, dia 600 mm,2 stainless steel heads

Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220581

• Manufacturer: Kleiser Gmbh

both sides , 4.685 l internal, 1.100 l jacket total height 8.550 mm

Stainless Steel 316 Wiped/Thin Film Evaporator - IPP# 205459

• Manufacturer: Pope Scientific

Wiped-Film Molecular (Short-Path) Still 2 to 50 liters/hour. Electrically heated with slotted glass filled Teflon wipers on rotor. Mechanical seal on shaft. With high vacuum pump.

Evaporator, Wiped Film, 30 SF, Rodney Hunt, S/st, #D739115

• Manufacturer: Rodney Hunt

Turba Film Evaporator, Rodney Hunt - Provides 30 sq. ft. of surface area and operates at up to 35 PSI and 300°F. Features a jacketed 60" long section but is less the drive.

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 70252

• Manufacturer: Luwa

3 sections jacket rated by 10bar @ 200 degrees C ( total volume 150liter).

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 206245

• Manufacturer: Buss-SMS-Canzler GmbH

4' of shell is 316SS lined and the rest of the shell Hastelloy C lined Hastelloy C shell, CS Jacket. Dual rated jacket 200 PSIG @ 400 degrees F or 100 PSIG @ 650 degrees F. With 20 HP, 900 RPM, 3/60/230/460 Volt ...

Stainless Steel 316 Wiped/Thin Film Evaporator - IPP# 232537

(Two SPDU's) product contact, complete Short path distillation plant. This unit was previously used to process 300 lbs/day of product. The system consists of two, 0.1 m2 short path distillation units, three cold ...

Stainless Steel 316 Hitachi Wiped/Thin Film Evaporator - IPP# 74896

• Manufacturer: Hitachi

jkt rated 125 psi @ 350 deg F 2-zone CS jkt. 10' long evaporation section. 8-blade rotor, mech seal on shaft. Belt driven by 30 HP, 3/60/460 volt, 890 rpm TEFC motor.

Evaporator Rising/Falling Film Two Effect Stainless Steel 304 - IPP# 216076

double effect evaporation system. See video of system operating at Capacity based on a brine stream at 24% to 50% strength. Feedstock of 32,000 lbs/hr(normal operating) or up to 50,000 lbs./hr. brine at ~ 20-25% ...

Zymark TurboVap LV Evaporator

• Manufacturer: Zymark

The Zymark TurboVap LV Concentration Evaporator, P/N 43750, is a workstation that provides simultaneous evaporation of up to (50) 15mL centrifuge tubes, offering many interchangeable tube racks which gives you th...

Stainless Steel 316 Artisan Wiped/Thin Film Evaporator - IPP# 91223

• Manufacturer: Artisan

hot oil jacket rated 30 psi/full vacuum @ 450 deg F. Driven by 7.5 HP, 3/60/230/460 volt, 1750 rpm motor. With 3 HP, 3/60/230/460 volt, 1750 rpm rotary gear pump.

Hastelloy - C22 Clad Wiped/Thin Film Evaporator - IPP# 220954

• Manufacturer: SMS Buss

with 316 SS rotor, Jacket rated for 218 psi at 482 degrees F. Heating surface area 150.7 Sq. Ft., Serial numbers: Lower Body Serial Number 1400/56, National Board Number 717; Interm body Serial Number 1400/56, Na...