Industrial Automation » Actuators » Pneumatic Actuators » Alabama

Building Filters

2

Used Pneumatic Actuators in Alabama, USA

  • Key QBV-40-P-AL Pneumatic Butterfly Valve

    Key QBV-40-P-AL Pneumatic Butterfly Valve W/ Rota-CYL ADL2.0X100-1-0 Actuator

    • Manufacturer: KEY, Rota-CYL

    Key QBV-40-P-AL Bolted Pneumatic Butterfly Valve with attached Rota-CYL ADL2.0X100-1-0 Rotary Actuator. Unit is used and was removed from a decommissioned system. See pictures, comes as shown. Info on Valve: KEY ...

    $349 USD
    Fayette, AL
  • Automated Logic LM24-M ALC Actuator

    Automated Logic LM24-M ALC Actuator

    • Manufacturer: Automated Logic

    Automated Logic LM24-M ALC Actuator. Unit is used in good condition (see pictures, comes as shown). Was pulled from a working decommissioned system. Info on actuator: Automated Logic Corp. LM24-M ALC Motor Voltag...

    $90 USD
    Fayette, AL

Overview

Pneumatic actuators convert compressed air into linear or rotary motion for valves, clamps, and machine elements. They’re valued for fast response, simplicity, and clean operation in environments where hydraulics or electrics aren’t ideal. When selecting an actuator, match stroke/torque, mounting, materials, and operating pressure to the application and check compatibility with existing controls and air supply.

FAQ

What should I check when buying a pneumatic actuator?

Verify stroke or torque, bore size, mounting type, port orientation, operating pressure range, materials, seal type, and compatibility with your control valves and air quality. For used units, inspect wear on rods and seals and ask for service history.

How do I prepare a pneumatic actuator for safe shipping?

Depressurize and lock the actuator, cap or plug ports, retract/protect rods, secure mounting brackets, and crate or palletize to prevent impact. Use a carrier experienced with precision industrial components and insure the shipment.

What regular maintenance does a pneumatic actuator need?

Maintain clean, dry, lubricated air with filters/regulators/lubricators, check and replace seals, inspect for leaks, verify alignment and mountings, and test cycle performance. Frequency depends on duty cycle and environment.