Used frames

HANNIFIN C-FRAME

• Manufacturer: HANNIFIN

LARGE HANNIFIN HYDRAULIC C FRAME PRESS Floor standing Driven by 15 HP 1725 RPM 220/440/3/60 motor wired 440 v 3 ph at this time Controls: Pushbutton operation with st...

1986 TOKYO SEIKI H-FRAME

• Manufacturer: Seiki

H-FRAME TYPE (2) PISTONS 8" STROKE X 2" DIA EA WORK TOGETHER 14" X 31" USABLE BED AREA 30" MAXIMUM DAYLIGHT TO TABLE 2.2 KW MAIN MOTOR GAUGE ON PUMP GOES UP TO 15,000 PSI HYDRAU;IC UNIT IS VICKERS MADE IN JAPAN ...

STRAIGHTING PRESS C-FRAME

• Manufacturer: STRAIGHTING PRESS

C-FRAME HYDRAULIC STRAIGHTENING PRESS, 16" THROAT APPROX. 16- 18" STROKE MUST VERIFY 5 1/2"CYLINDER 15 1/2' BED AREA 2" THICK STEEL FABRICATION 16" X 84" BED, 5 HP HYDRAULIC UNIT, FRONT SUPPORT FIXTURE, GAGE ...

66 TON AIDA GAP FRAME PRESS

• Manufacturer: Aida
• Model: NC1-600
• Stroke length: 139.95 mm
• Shut height: 299.72 mm

This used 66-ton AIDA Gap Frame Press, model NC1-600(2)E, is designed for versatile industrial applications. It has a stroke length of 5.51 inches and a slide adjustment range of up to 2.7 inches, allowing for pr...

42 TON NEFF C FRAME HYDRAULIC PRESS

• Manufacturer: Neff

The used NEFF D40-15M is a robust 42-ton C frame hydraulic press, suitable for industrial applications requiring precise force and control. This machine features palm buttons and light curtains for enhanced safet...

15 TON C-FRAME HYDRAULIC PRESS. #0102523

30 TON PITTSBURGH H FRAME HYDRAULIC PRESS. #0952123

30 Ton Pittsburgh H Frame Hydraulic Press 23-3/4” Between Posts Adjustable Table Height Floor Standing Some Tooling as Pictured

BLISS GAP FRAME PRESS

• Manufacturer: Bliss
• Capacity: 60,000 kg
• Stroke length: 76.2 mm

The Bliss Gap Frame Press, model HP51397, is a used C-60 press with a 60-ton capacity. It features a 3-inch stroke length for efficient operations and a slide adjustment of 4 inches to accommodate various process...

32 TON MINSTER GAP FRAME PRESS 12079J

• Manufacturer: Minster
• Model: B1-32

MODEL: B1-32 SERIAL #: 20751 1.5" STROKE 11" SHUT HEIGHT 2.25" RAM ADJUSTMENT 0-400 SPM 24" x 15" BED AREA 13" x 10" RAM AREA AIR CLUTCH & BRAKE PALM BUTTONS NEED TO BE REPLACED *VAMCO FEEDER NOT INLUDED* GOOD ...

15 TON PERKINS GAP FRAME PRESS 17014D

• Manufacturer: Perkins
• Model: 15S

MODEL #: 15-S SERIAL #: 44935 1 1/2" STROKE 2 1/4" RAM ADJUSTMENT 7 3/4" SHUT HEIGHT 1 1/4" SHANK 10" x 20" BED DIALATRON 400 TONNAGE MONITOR RECIRCULATING LUBE SYSTEM 2" BOLSTER 3 HP 230/460/60/3 AIR CLUTCH AI...

88 TON AIDA GAP FRAME PRESS 16082B

• Manufacturer: Aida
• Model: NC1-80

MODEL #: NC1-80 SERIAL #: 00208-7083 88 TONS MAXIMUM CAPACITY 6.29" STROKE 12.59" SHUT HEIGHT OVER BOLSTER 3.04" RAM ADJUSTMENT 21.2" x 18.1" SLIDE AREA 37.4" x 18.1" BOLSTER AREA 40 - 75 SPM WINTRESS CONTROL W...

25 TON SAVAGE PNEUMATIC H-FRAME PRESS. #0559925

• Manufacturer: Savage

29.5 TON NEFF HYDRAULIC C FRAME PRESS

• Manufacturer: Neff
• Stroke length: 254 mm
• Daylight: 609.6 mm

The NEFF DF-25-15M is a robust 29.5-ton hydraulic C-frame press, ideal for various industrial applications. This used press was built in 2005 and has several key features that offer both efficiency and safety. It...