Used Evaporators

Stainless Steel 304 Rising/Falling Film Evaporator - IPP# 216076

double effect evaporation system. See video of system operating at Capacity based on a brine stream at 24% to 50% strength. Feedstock of 32,000 lbs/hr(normal operating) or up to 50,000 lbs./hr. brine at ~ 20-25% ...

Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220585

• Manufacturer: Pitton-Gessner/Germany

1.4571/H2 falling film rated -1/3 @ 200 ° C bar, 640 l tubes, -1/9bar@ 250 ° C, 610 l shell, dia 600 mm,2 stainless steel heads

Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220581

• Manufacturer: Kleiser Gmbh

both sides , 4.685 l internal, 1.100 l jacket total height 8.550 mm

Stainless Steel 316 Wiped/Thin Film Evaporator - IPP# 205459

• Manufacturer: Pope Scientific

Wiped-Film Molecular (Short-Path) Still 2 to 50 liters/hour. Electrically heated with slotted glass filled Teflon wipers on rotor. Mechanical seal on shaft. With high vacuum pump.

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 70252

• Manufacturer: Luwa

3 sections jacket rated by 10bar @ 200 degrees C ( total volume 150liter).

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 206245

• Manufacturer: Buss-SMS-Canzler GmbH

4' of shell is 316SS lined and the rest of the shell Hastelloy C lined Hastelloy C shell, CS Jacket. Dual rated jacket 200 PSIG @ 400 degrees F or 100 PSIG @ 650 degrees F. With 20 HP, 900 RPM, 3/60/230/460 Volt ...

Hastelloy - C22 Clad Wiped/Thin Film Evaporator - IPP# 220954

• Manufacturer: SMS Buss

with 316 SS rotor, Jacket rated for 218 psi at 482 degrees F. Heating surface area 150.7 Sq. Ft., Serial numbers: Lower Body Serial Number 1400/56, National Board Number 717; Interm body Serial Number 1400/56, Na...

Stainless Steel 316 Wiped/Thin Film Evaporator - IPP# 232537

(Two SPDU's) product contact, complete Short path distillation plant. This unit was previously used to process 300 lbs/day of product. The system consists of two, 0.1 m2 short path distillation units, three cold ...

Stainless Steel 316 APV Rising/Falling Film Evaporator - IPP# 215278

• Manufacturer: APV

98.6% water evaporation 4-effect falling film evaporator system Designed by Fritz Voltz sohn feed rate 3.4m3/hr, product 1.3 m3/hr Feed to 1st evaporator is 3.4 m3/hr @ 34.8% concentration and @ 104 deg C vacuum ...

Stainless Steel 316L Pfaudler Wiped/Thin Film Evaporator - IPP# 233717

• Manufacturer: Pfaudler

wiped film evaporator system. Jacket rated for 160 psi at 650 degrees F. Drive system by Pfaudler, 3 DTW With 158 Sq.Ft. external condenser, 316 SS tubes 316 SS tube sheet 316 SS heads CS shell NB # 43399 Shell s...

Stainless Steel 316 Artisan Wiped/Thin Film Evaporator - IPP# 91223

• Manufacturer: Artisan

hot oil jacket rated 30 psi/full vacuum @ 450 deg F. Driven by 7.5 HP, 3/60/230/460 volt, 1750 rpm motor. With 3 HP, 3/60/230/460 volt, 1750 rpm rotary gear pump.

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O

• Manufacturer: Organomation

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O is a reliable solution for efficient nitrogen evaporation in the lab. This model is ideal for laboratories nee...

Stainless Steel 321 Buhler OTW-500 Crystallizer/Evaporator Plastic - IPP# 219971

• Manufacturer: Bühler

Vibrating fluid bed with enclosed chamber rated pe=60 mbar total pressure drop, ca.30 mbar differential pressure ca 2 mbar design pressure pe=90 mbar @ 200 deg C, 400 deg C product thickness ca.200mm Openings inc...