Used Lathes in Saxony, Germany

PAGUS face plate

• Manufacturer: Pagus

Face plate, clamping plate PAGUS 4x threaded hole: M16 x 2.0, depth: 30 mm used, tested !

STANKO face plate

• Manufacturer: Stanko

Faceplate STANKO 7103-0049 4x threaded hole: M12 x 1.75, depth: 40 mm 1x hole: Ø 19 mm, depth: 8 mm Cone: Ø 103 / 106 mm, depth: 15 mm New !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS bore Ø: 61 / 70 mm, with thread, pitch: 6.0 mm used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS Outside ø: 305 mm | Hole circle ø: 280 mm | Bolt circle flange ø: 135 mm | Bore ø: 35 mm | Thickness: 50 mm | Groove: 14 / 24 mm | Dimensions: 305 x 305 x 50 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS Short cone External ø: 400 mm | Flange: 155 mm | Hole circle: 134 mm | Bore ø: 110 mm | Height with jaws: 140 mm | Total height: 190 mm | Dimensions: 400 x 200 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS with reversible jaws ! used, tested !

WMW face plate

• Manufacturer: WMW

Faceplate WMW, ROTO RECORD P 400x8 ( P400x8 ) TGL 30-22313 used, tested !

PAGUSPlane

• Manufacturer: Pagus

Faceplate PAGUS used, tested ! External ø: 400 mm | Hole circle ø: 135 mm | Bore ø: 100 mm | Back height: 100 mm | Dimensions: 400 x 400 x 210 mm

STANKO face plate

• Manufacturer: Stanko

Faceplate STANKO Outer Ø: 400 mm 4 jaws New ! Hole circle: 135 mm | Height with jaws: 160 mm | Bore ø: 100 mm | Total height: 160 mm | Dimension: 400 x 400 x 160 mm

STANKO face plate

• Manufacturer: Stanko

Faceplate STANKO 7103-0049 New ! preserved ! Outside ø: 400 mm | Hole circle ø: 135 mm | Bore ø: 100 mm | Dimensions: 400 x 400 x 165 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate Pagus used, tested ! External ø: 700 mm | Hole circle ø: 150 mm | Bore ø: 95 mm | Flange ø: 195 mm | Dimensions: 700 x 700 x 113 mm

WMW face plate

• Manufacturer: WMW

Faceplate WMW Ø 500 mm 4x threaded hole: M12 x 1.75, depth: 35 mm Mounting flange: Ø 103 / 106 mm, depth: 15 mm (conical) 8x slotted hole: Ø 18 mm, length: 85 mm 4x slotted hole: Ø 18 mm, length: 100 mm with one-...

ROTO RECORD face plate

Face plate ROTO RECORD PLV 315x6 ( PLV315x6 ) TGL 30-22313 4x threaded hole: M10 x 1.5, depth: 30 mm Mounting flange: Ø 80 / 82 mm, depth: 12 mm ( conical ) with one-piece reversible jaws used, tested !

ROTO RECORD face plate

Face plate ROTO RECORD PLV 400x6 ( PLV400x6 ) TGL 30-22313 4x threaded hole: M12 x 1.75, depth: 24 mm Mounting flange: Ø 103 / 106 mm, depth: 12 mm ( conical ) with one-piece reversible jaws used, tested !

HSW-SCHMID pull-down chuck

• Manufacturer: Schmid

Pull-down chucks, 3-jaw chucks, three-jaw chucks, power chucks HSW-SCHMID Flange diameter ( inside ): Ø 105 / 100 mm, depth: 10 mm ( conical ) used, tested !