Used compression

Plate Type Heat Exchanger Good Quality Hot Sell

The plate heat exchanger is composed of main components such as a frame, a heat transfer plate group, and clamping bolts. The frame includes a fixed pressing plate and a movable pressing plate, supported by the u...

Brazed PHE

Brazed plate heat exchanger is made of many stamped corrugated thin plates at a certain interval, sealed with gaskets around them, and laminated and compressed by a frame and a compression screw. The four corner ...

Dimple Plate Heat Exchanger

Removable plate heat exchanger is made up of many stamping with corrugated sheet in a certain interval, all round through the gasket seal, with overlapping framework and compression screw compression, plate and g...

Steel Heat Beer Wort Chiller Copper Plate Brazed Heat Exchanger

The brazed plate heat exchanger is made of many stamped corrugated thin plates at a certain interval, sealed around by gaskets, and overlapped and compressed by a frame and a compression screw. The four corner ho...

Bphe Evaporators

BPHE evaporator Just as all the contact points of the detachable points must be closely fitted, all the contact points of the brazed heat exchanger must be completely welded together, so as to ensure that themach...

Brazed Plate Heat Exchanger Produce

Brazed plate heat exchanger is designed to have no dead zone, so chemical cleaning can be carried out on site without disassembly. In most cases, the arrangement of the flow channels enables the inlet and outlet...

Serrated Finned Tube

Description Finned tube aluminum radiator pipe was also no longer uses the spiral wound treatment, but the corresponding specifications of the steel and aluminum group Mr Guan together, through the device will be...

Heat Exchanger PHE

Product Description The plate heat exchanger is composed of stamped and formed concave and convex stainless steel plates. The concave and convex patterns between the two adjacent plates form a 180 degree relative...

3-in-1 Brazed Heat Exchanger As Air Dryer

Brazed plate heat exchangers (BPHE) are compact heat exchangers, widely used in air dryers. Their 3-in-1 design allows for the efficient heat transfer between air and refrigerant(R134A, R290, etc. ), making thems...

High Pressure Valves 2.3－2.8 For Meeting Refrigerant R2 R417A

• Manufacturer: Meeting

High pressure valves 2.3－2.8 , For Meeting Refrigerant R22,R417A Product discrition: Heat pump used the heat from the air -20℃ below the cold coal recovery after compressed into a high temperature and high pressu...

Plate and Gasket Heat Exchanger

Gasket Heat Exchanger The plate thickness of the plate type is only 0.4~1.2mm, and the thickness of the tube of shell and tube type is 2.0~2.5mm. The shell is much heavier than the frame of the plate heat exchan...

Meeting Air To Water Heat Pump 1.5M To 6M Black Probe Wire

• Manufacturer: Meeting

1.5M to 6M Black probe wire , For Meeting Air to Water Heat Pump Product discrition: Heat pump used the heat from the air -20℃ below the cold coal recovery after compressed into a high temperature and high pressu...

100 Litre Expansion Vessel

100 Litre Expansion Vessel Product Introduction Expansion tank, also called air pressure tank, is a functional product that can automatically stabilize pressure and is widely used in various closed loop systems a...

Ultra Thin Dehumidification Three In One 1000L/H Air Source Heat Pump

• Manufacturer: Meeting

The latest series of ultra-thin dehumidification three-in-one air source heat pump Three in one pool heat pump: Parameters and Installation Product discrition: Heat pump used the heat from the air -20℃ below the ...

Ingersoll-Rand IR R55-A Compressor & NVC400A40N Dryer {CDA}

• Manufacturer: Ingersoll Rand
• Model: R55N

Capacity & Performance Flow Capacity: 400 SCFM (11.3 m³/min) at 100 PSIG Pressure Dew Point: 38°F (3°C), achieving ISO Class 4 air quality Maximum Operating Pressure: 230–300 PSIG (15–20 BARG) Pressure Drop: 2.9 ...