Used l/c

Tuthill 2C2E-CC Rotary Gear Pump 1" NPT 16mm Shaft Dia. 1.5 in L Cast Iron Used

• Manufacturer: Tuthill

This is a used Tuthill Rotary Gear Pump. Save thousands and buy used from Green Industrial today!

ARO PF20C-ACS-SAA 2" Diaphragm Pump Air Operated Cast iron

• Manufacturer: ARO

“Used, in nice condition. This unit was in working condition when taken out of service.” ARO PF20C-ACS-SAA 2" Diaphragm Pump Air Operated Cast iron Used, in nice condition. This unit was in working condition when...

MILWAUKEE VALVE ML223E 38032 L-C91 3 INCH CAST IRON BUTTERFLY VALVE LUG PATTERN EPDM LINER T183881

• Manufacturer: Milwaukee

Extra Information Brand: Milwaukee Valve MPN: ML223E Alternative Part Number: 38032 L-C91 Shipping Weight: 15 LBS Shipping Dimensions: 15 (in) × 14 (in) ...

2012 Freezer HAIER 100l; -86°C

• Manufacturer: HAIER

External dimensions: length: 770mm; width: 830mm; height: 1120mm Internal dimensions: 470x450mm; Depth: 480mm 240V/50Hz; 6A; 650W Lid opens at the top With CE Last tested 09/2023

Gasing unit laempe G2C1 for cores up to 25l

• Manufacturer: Laempe / Röperwerk

3+3kW; 380V with double heater Year: 1991 | Weight: ±250kg

Shipco 80LP Cast Iron Condensate Pump w/ Marathon 5KC39EN4077X Motor

• Manufacturer: Marathon

Shipco 80LP Cast Iron Condensate Pump w/ Marathon 5KC39EN4077X Motor Shipco 80LP Condensate Pump - Model : 80LP - Cast Iron - Rated 12 GPM @ 20 PSIG - Motor HP : 1/3 - Voltage : 115/1/60 V - Pump Type : 110-D Mar...

AIR CHOC 50 l

Type: 0501030A, serial number: 050 Weight: 48 kg | External dimensions: 870 mm x 800 mm, Ø 300 mm | Performance pressure: max. 12 bar | Minimum temperature: - 20°C | Maximum temperature: + 120 °C | Air pipe exit:...

2002 Gravity die casting machine IMR C60X

• Manufacturer: IMR

Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...

Sand conveyor KLEIN 200 l

Outside dimensions: Ø 750 mm, inlet height: 1450 mm Cone closing 8 bar, content 200 L, 100°C Overhauled with a new switch cabinet

Core shooter LAEMPE 40 l

• Manufacturer: Laempe / Röperwerk

Air tank 100 l, clamp with vacuum plate Gassing carriage with vacuum clamping, gassing plate 1000 mm x 800 mm Electronic control PLC B&R (BERCHNECKER UND RAINER), Type NT33 Welded construction Motor for the hydra...

Ingot 10 steel trestles for residual liquid max +- 400 C°

10 moulds with a volume of ±3l External dimensions: Length: 1500mm; Width: 750mm; Height: 800mm Mould dimensions: Length: bottom: 550mm; Length: top: 640mm; width at top: 110 mm; width at bottom: 30 mm Fold back ...

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

1972 Sand conveyor 200 l, KLEIN

With 2 level detectors Weight: 300 kg | Outside dimensions: Ø 700 mm, h. 1800 mm | Pressure: 8 bar, 100 °C